Search results

i just got a sand blaster last night ,i try'd it out today and i keep getting shocked, its a static shock. what can i do to help prevent this?

well my warrior was sittin for about a week or so, today i steped on the peg to grab something on the other side of the bike and all i here is some squriting noise i looked down and oil was coming out the rear shock. its been cold here lately too. what happend lol can i fix, btw the shock is...

hey does anyone no what size threads are on the end of a '88 axle? btw it has to be from an older axle cause my 2000 warrior has different threads.

i just rebuilt the head, put new valve guides, valves, seals and valves seated and it still smokes, the piston is a wiseco about 1.5 years old (i think, cant remember) and the rings are about 6 months old (i think lol) and it still smokes. it smokes the worst at start up but once it starts to...

my warrior is really hard to start, most of the time it wont, if i crank it over for a while it will start sometimes, then when i shut it off for a second and start it again it will fire right up, but if i let it set for a few minutes and try it wont start? i can jump start it fine, fires right...

hey im replacing my valve guides in my warrior so i bought some kibble white guides off ebay, i just got them today and the valve wont fit threw them? there a couple thousands to small? did they give me the wrong ones or what?

hey i got two heads for my warrior ones a 88 and the other is a newer one, not sure of the year, but they are both different, the valves and the ports in the 88 are about 1mm smaller than the newer head? but all the part numbers are all the same from 87-04. i was thinking the 88 head was from...

when im at full throttle it sputters as if there was a rev limiter, the bike is jetted pretty much perfect the plug is a brownish/tanish color. I did notice the exhaust leaks a little where it connects to the head would that cause it?

okay.. i was driving the warrior down the road ,then it started to make wierd clunky noises so i slow down to a stop and then it quit, tryed to turn it over the starter wouldent budge so i figure its siezed. get it back to the house take the valve covers off to check the rockers to see if their...

ok so i was wondering..., my ball joint is worn out on one of my upper a arms , its a 2000 by the way, and in stead of buying a new a arm could i grind out the old ball joint and weld in a ball ball joint from 87 modle a arm?

hey i just got my warrior running (rebuilt the motor) anyways it will only go in reverse,i cant get it to go in any forward gears when i pull the reverse lever to forward it makes a clicking noise sometimes i can get it to go in gear but then it just pops back. any help would be great i want to...

this is my warrior when it was running back in august http://www.youtube.com/watch?v=8Xz87cFC0Wc i have more vids of me doing wheelies and stuff there to, just click more from connectmightcell link thingy. enjoy!

hey, my left side axle bearing keeps going bad it wont last more than a week if im lucky. what would cause this? im thinking its my axle cause on the sprocket side of the axle where the bearing sets on theres a groove all around the axle. would that cause it? if so could i weld up the groove? my...

i tryed buying new crank bearings for my warrior and the book has 2 different bearings, one says for new oem or hotrods cranks which is 22.99 and the other one says for rebuilding oem or hotrods cranks and that is 52.99, it also says the 52.99 and 22.99 ones only come with one bearing but they...

hey im replacing my lower steering stem bearing but i can not get that retainer out ive tried letting it soak in oil and heating it up im using a bolt and a ratchet and putting a big wrench at the end of the ratchet and standing on it and it aint budging, is it a normal thread? you guys got any...

ok i split my cases in my warrior theres some play in the bearings is there supposed to be any? and how do you take the left side crank bearing off the one behind the lower cam gear does the gear need to be pressed off? thanks

hey recently broke my cam , the cam gear key got sheared off. and metal pieces got in my case aswell as a washer do i need to split my cases or is there any other way to get them out? i draind the oil already and some metal pieces came out.

im replacing my clutch, do i have to turn them a certain way?is there a sequence order of the plates?

will a banshee swing arm and carrier fit on my warrior?

hey im just wondering where i can get a set of over sized valves?