Search results

warrior has a hard spot while cranking and wont crank over. the battery is fully charged and good. starter clutch appears to be ok so what else could it be?? help asap thanks!

hey guys an uncle of mine just bought an 87 that wont start. I went over and it has no spark so i tried to ohm out the stator. Both pickup coils seemed fine at about 190 ohms but when trying to test the source coil the book(clymer) calls for red and black wires. I dont see these colors. The...

i put in a rmstator about two years ago and now the warrior wont start. ive ohmed out the red/white at 457 ohms and the green/brown at 650 so wheres this at compared to where it should be?

link is here...http://stlouis.craigslist.org/mcy/2118773657.html

what are they, and what do they do? i think i need both, they are all chewed up and broken.

ive got spark but no start. bike turns over slow, battery is good. ive read the clymer on testing but the wires coming out of my stator are red/green on one plug and brown and green on the other. the colors listed are different. so whats the procedure and the specs? Also when turning over it...

under the rear fender, what do they do and how important are they? one looks like it has been through a lawnmower and it hums while the key is on. Also i noticed that the black wire on my voltage regulator gets pretty warm while running what would cause this and do the voltage regulators ever...

ive seen it on here but cant find it, i still havent figured out my starting problems and after going through the clymer the colors of the wires they are telling me to test are not the same as mine. I am wanting to test my stator and pickup coil so i can see if its time to order a new cdi. any...

ive been having starting issues for several months now and cant figure it out. The warrior will not start on its own, only with a 40 amp charge from the charger. It is getting tons of spark, fuel and air. It will crank and crank and crank but no start. If you hook up the charger on 40 amp it...

i was in a hurry to ride and all i had was vavloline to change oil with so i went with it knowing id be changing it out again first chance i got, well now the ol clutch started slipping again (imagine that). i put an extra steel plate in about a year ago after i noticed it slipping a little so...

ok guys since the rebuild the warrior doesnt always want to start. It will not start cold unless its on 200 amp start from the charger, it will then fire right up. 10 or 40 amp will not start it. It is getting gas and has great spark. I put a new stator and cdi in it last fall and it has...

ok guys its all back together and running like a champ but it never wants to start. it will crank for days but never start. It has tons of spark and is getting fuel and runs excellent after you get it started. To get it started it A. it either has to be pop started, or B. started on the...

finally had a little time this weekend and for the first time in over a year the warrior is back together and running better than ever....so far. lil refresher, the rod bearing went out last fall and i just now got time to finish up the rebuild. new rod bearing, oil pump,timing...

hey guys, i almost have my warrior back together from the crank going bad on me. All i need to do is get the jug bored and put an oil pump in and i should be ready to ride again. I was wondering if anyone knows of somewhere cheap to get an oil pump from. South Seattle powersports wants 73$...

all i need to get my warrior back together is to get the jug bored and an oil pump. if anyone has one that is good and doesnt have any scarring inside the pump assembly let me know.

hey guys i finally got around to splitting the cases and pulling out the crank so i can be rebuilt. It wasnt so bad splitting the cases, i think the worst part was getting the flywheel off. Even with the puller it still didnt want to come off. i added a lil heat and she finally popped off. I...

it snowed about 2 ft here last night and sleeted all day yesterday so i made some new lanes this morning and played around in the snow. Had to recover a 2wd fullsize ford this morning, i had to go through the yard to get to him and lemme tell ya i got some funny looks from all of the honda...

heres a couple of pics from this weekend. the motor is tore down to the flywheel in preperation for a rod to be put in so i figured id take some pics.

if you have one you would sell or know of the cheapest place to get one let me know

ok guys i got the warrior running only by pulling it still but after a while of riding it started hammering pretty hard and after a teardown i found that the main bearing on the rod is toast. Theres like 1/8" of play in it so it looks like its time for a new rod. How much of a pita is it to...