Search results

Got a 2003 big bear 400 that wouldn't charge. Got a new stator and rectifier and still won't charge. I have continuity between the 3 pin plug on all of them. Any other tests I can do?

its an 05 blue. its a little rough but im thinkin of building it up and putting 26 10 12 kenda executioners on it.. help me on how to load pics again i can never get it to work. any ideas on motor work. like swapping big bear 400 crank and high compression piston. valve kit, cam , and i heard...

well after about $3000 i finally thinking about parting it out cause i bet i cant sell it for over $2000. im bout ready to graduate and looking for a new truck so i need money. just ask what you might be interested in. i have a lot of stuff to list. i need help uploading photos cause photo...

well i got one and put it in the advance way and wen i got full throttle it just cutts out and my jettings perfect. so today i was riding and went across a ditch and accidently let it stall out and sheared the key right off. i even had the bolt in the crank torqued. and loctited. I heard they do...

I have two stock yamaha warrior/raptor350/banshee 9" rims for rear. great shape no a nick on them. also front pair of yamaha 10" rims have valve stem in inside for being flipped. if you want them regular change valve stems around or a carriage bolt. also a pair of suzuki sport atv 8" rims 4 lug...

I went to this auction today and got 3 sets of wheels. two are yamaha rims and the other is suzuki. the mudsharks are like new but the rest are ****.. also pro circuit silencer and platnum series expansion pipe for a banshee. they need cleaned up though. altogether $30 :tup::iagree: how much...

how hard is everyone elses modded warrior to start. i got great spark, getting fuel, and its on time, valves set right. I have the original cam, JE 366 10.5.1 comp. and run 91 octane. should i see how 87 octane will start it better. im going to tinker on the lathe today and make a adjustable cam...

so this winter i made me some new a arms, extended and stronger stem. now i bought some fox shocks off a polaris snowmobile $60, and rebuildable. I just need to finish building my swingarm, put gussets on a arms, and make an oil cooler guard. Im not too happy about the bottom a arms cause i...

http://www.ebay.com/itm/MIKUNI-VM-Perf-Carb-YAMAHA-YFM350-Warrior-Wolverine-Big-Bear-/230718372054?pt=Motors_ATV_Parts_Accessories&vxp=mtr&hash=item35b7e2f8d6 would this be worth getting? it don't have a accel pump does it?

http://www.ebay.com/itm/320744687311?item=320744687311&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr do you think using them two boots and make a piece of aluminum in between them so they dont crack so often? im gunna get measurements and see if the would work, and make a center piece.

so is a durablue axle for warrior where the bearing rides 35mm or 40mm, i cant get to mine for a few days and came across a couple carriers one for a yfz 450 and a banshee. or what carrier do i need to fit my durablue axle and 87mm straps.

okay im almost done with my a arms and found a great pair of 03 raptor 660 front shocks. what is your shock length for +2 a arms that dont make it sit too high or too low?

i seen in the elite kevinraptor has one but doesnt have it listed were can i get me one?

i came across a descent looking 1995 yamaha kodiak 400 4x4 $800 the guy says it smokes and needs rings. lol? is it worth the hassle make any $$$

i need a good pair of shocks for a decent price i wont go over $250. i dont have cash now but need to find some when i get my a arms done soon. how would a banshee or 2001 raptor 660 work for rear. i found some aftermarket ones for raptor 250. just need help keeping an eye out for some soon.

we probably talked about this before but i am bout to hit 10 hours and want to change oil, filter, check valve clearance and everything else. i have the new bellray 4t 4 stroke oil and its like im runnin gas in my oil, but im not it dont smell like it one bit but wen its cold or hot it drips off...

well i need a project for shop class and found a guy with a suzuki made some a arms out of DOM .120 wall pipe they looked good. i was going to make a jig for them, but what brand, what type of ball or hiem joints? i found some hiem for $20 a piece and im just goint to make the same style...

okay i was fine but now im way too lean again. im on the bottom clip with a 155, i ordered a 160 but idk i have je 366, hmf, K&N with lid cut, ported and polished, valves reground, it will start but when you rev it it will pop and backfire like hell and let off and it barely idle, my plug is...

okay so last week i got to 6 hours and blew a head gasket. so i tore it down and took the valves out to do some more portin and polishin in it and my valve seal was ate at one side on exhaust like it was bent. it was really bent and there was a little ring under carbon on my old piston. so i got...

how much can i get out of my 366, i dont want to but i would really like to have a yz 250 for our freestyle track we built at our compound lol the warrior will jump good but i just wanna go higher and further, i might not sell it and wait till next spring and get one so it can be payed for. i...