His clutch is working the way it is designed to do. We saw that between the 1st and 2nd vids in his other thread. It was engaged in the 1st, and was disengaged in the 2nd when he tightened the cable too far. So the clutch does work, my gut tells me cable adjustment issue. And you can see in this latest vid that the front nut is adjusted all the way out. Meaning the lever won't get pulled far enough forward to disengage the clutch. If he turns the front nut in (towards rear of bike) it will pull the clutch arm farther forward and will disengage that clutch. He basically has to split the difference between the two nuts.