Warrior to Raptor 350 project

[97warrior_rider]

I believe so yes


Sent from my iPhone using Tapatalk

 

[JCDigital]

Almost finishing ALL ELECTRICAL SYSTEM... signal lights, hazard lights, HeadLights, led dayrunning ligths, tail led tail brake lights, hazard switch, clutch engage indicator light, Stator CLEAR cover (inside) light, CLEAR Air Box led light & Battery Voltzmeter.

I as soon as i finish i will upload pictures of progress.

 

[JCDigital]

I think tomorrow i will finish my ELECTRICAL SYSTEM...


Sent from my iPhone using Tapatalk

 

[JCDigital]

https://vimeo.com/127106269


Sent from my iPhone using Tapatalk

 

[JCDigital]

Here some pics...

Sent from my iPhone using Tapatalk

 

[JCDigital]

Ok, Electrical System Finished!!!


Sent from my iPhone using Tapatalk

 

[JCDigital]

Here in left side is the Hazard Switch, the switch for the LED lights of CLEAR Air Box and Stator Cover and Speedometer...


Sent from my iPhone using Tapatalk

 

[JCDigital]

Sent from my iPhone using Tapatalk

 

[JCDigital]

Sent from my iPhone using Tapatalk

 

[JCDigital]

Besides the Flip Top frame, i make All other Fenders easy to take out... no Bolts! I made Pin Mounts like Race Cars for my Warrior! Here couple of pics

Sent from my iPhone using Tapatalk

 

[JCDigital]

This week i will relocate Crank Breather Filter inside the Air Box.


Sent from my iPhone using Tapatalk

 

[JCDigital]

Electrical system DONE! here some pictures...

I will upload a video of ALL ELECTRICAL SYSTEM in function...

 

[JCDigital]

Veterans advice HERE!!!
Im ready to MOD Engine at its MAX if i could, please share your options and opinions about Pistons - [overbore or high compression], carburetors, cams, valves, porting, etc you name it...

 

[alex456123]

Racing gas or no racing gas?
Cams are preference on where you want the powerband.
I'd run a 11:1 wiseco piston with the smallest bore possible, so stock size or 20 over.
Oil cooler is a must with high performance applications
I'd also run a vm38 and a big bear 350 head with the castings cleaned up and polish the exhaust port with warrior HD valve springs. You'd have to run premium fuel.

 

[JCDigital]

Alex:
Premiun gas(high octane) for this build would be alright. I have a Oil Cooler but results that the Big Bear MOD wasn't doing much and Head was overheating! Do you think OIL COOLER clutch cover would do better job?
btw...I have HOTRODS complete bottom end on my bike.

So wiseco 11:1 and vr38 carb, and CAM aperture(#)?
*How can you describe power output with this settings and what gearing setup your run?
*How is vr38 throttle response?
I found a Deal for the (vr38) for $69.00 in great condition... What do you think??

 

[97warrior_rider]

It's a vm38 bro and I have one on my build the response is 100x better then stock


Sent from my iPhone using Tapatalk

 

[JCDigital]

It's a vm38 bro and I have one on my build the response is 100x better then stock


Sent from my iPhone using Tapatalk

Thanks to let me know Broa!
I found a deal for one in 69$ and another in better condition in 87$
what you think?

 

[97warrior_rider]

If it's a vm38 makuni jump on it that's a deal that's hard to find


Sent from my iPhone using Tapatalk

 

[JCDigital]

Hey what cam are you running with the WISECO 11:1?

 

[JCDigital]

Here is a vid of my Warrior re-build Electrical System

I will be uploading all my videos from my build in this youtube channel...
- ITSElemental -
https://www.youtube.com/watch?v=4sFVegc3-Us