Might be getting a 96 Blaster

['00 WO-YA!]

You're right hauler, if you just unplug it at the carb the fucker won't start.

 

[Mathius]

What, wait, what do you guys think would be hard? A 30 fits the intake reed boot fine and you just have to boil the filter side boot so that it expands. It goes np. Like I said, were running a 30 mm OKO WHICH is a pwk basically. I've never had trouble tuning a Mikuni.

Yah. Like he said. lol
It'll fit the intake, I didn't know bout the filter though. You would just have to piss around getting the jetting right.

 

[88WarriorBoy]

its not fitting to carb its the takin it off 6000 times to re do the jetting, Thats what i don't like about swaping carbs

 

['00 WO-YA!]

That's with anything man, the stock jetting will be close enough to get a baseline. We forum guys are just spoiled cause we don't have to tune anything anymore, we just ask what jet we need for our mods, 30min later we have 10 opinions. Hauler is a smart guy, he'll figure out the jetting.

 

[YAMAHAULER]

so How would I go about shortening the Pro Circuit silencer on the blasty?

 

[MS_Warrior]

so How would I go about shortening the Pro Circuit silencer on the blasty?

the same way Weston told you to!!! hahahahaha

 

[YAMAHAULER]

Haha! very funny Levi
I wasn't expecting an answer cause I whatsapped after midnight so that's why I posted here too plus the blasty thread needed a bump lol!

 

[lbjamm]

so How would I go about shortening the Pro Circuit silencer on the blasty?

Saw. lol

 

[alex456123]

saw with a guide to cut it strait.

 

[88WarriorBoy]

yeah there is 4 allen bolts on the front of the silencers to take the core pout the cut it down from there and also drill nrw holes for the allen bolts

 

[YAMAHAULER]

What kind of steel wool do I repack it with?

 

[alex456123]

any kind lol. dollar store stuff is what i used!

 

[buzzy613]

just be carful steel wool is highly flamable!

 

[alex456123]

how? it is steel!

 

[88WarriorBoy]

you have never taken a 9volt to steel wool before have you lol it goes up like gas

 

[buzzy613]

thats the odd thing about it i was grinding a pice of steel and a spark caught my steel wool and the fibers burn just like cotton so it whent WHOOOOOFFF!!! and it scared the hell outa me

 

[88WarriorBoy]

its so thin that it acts like a lightbulb filament

 

[Gen1Pat]

Yep, fire starter right there.

 

[beastlywarrior228]

Steel wool is mostly iron and burns to make an iron oxide, like rusting but a lot faster

 

[buzzy613]

Steel wool is mostly iron and burns to make an iron oxide, like rusting but a lot faster

i never knew that lol chem with beastly sounds like my kind of clas:slayer::evilface: