Bkroll84's Quad. Elite?

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bkroll84

Well-Known Member
Joined
Dec 28, 2012
Messages
1,175
Reaction score
0
Location
sterling heights,MI
april13068_zpsbec972da.jpg
Before
shit_zps062d8f8e.jpg

After

april13069_zps34ac438f.jpg

april13068_zpsbec972da.jpg

april13071_zpsae40a946.jpg

april13073_zps6a4b130e.jpg

april13074_zps60b7cdaa.jpg

004_zps0a2c9643.jpg

001_zps1bb39675.jpg


http://youtu.be/5q8WtZS70a8

Chassis | Suspension | Controls
Frame:stock
A Arms:+2 full flight
Swingarm:+1 87 swingarm
Steering Stem:Stock +2 inch tusk bar risers
Stabilizer:n/a
Axle: Durablue x33 +2 +4
Carrier:2nd gen carrier with pivot works bearings
Locknut: Durablue
Hubs F|R:stock/Durablue
Bars:pro Taper
Throttle/Clutch Lever:Stock/R1
Grips:Tag
Nerfs:n/a
Pegs:Ims roll design with tusk ltz400 heel guards
Bumper:prm baja
Grab Bar:AC wide
Front Shocks:Works triple rate for raptor 660
Rear Shock:banshee
Brake Pads:EBC
Brake Lines:stock
Rotors F|R:magnum with yfz450 front/stock rear
Rims F|R:stock
Tires F|R:CST ambush
Plastic:stock cut front fenders
Graphics|Seat Cover:made by me with blue insert
Number Backgrounds:n/a
Handguards:pro Taper
Bar Pad:pro Taper
Fuel Tank:stock with grenade breather tube
Skids plates:AC
Lighting:Led front and rear
Engine|Drive System
Cylinder Head:p&p
Gaskets:tusk
Piston:wiseco
Cam|Valves Springs:stage 2 hotcam kibblewhite springs with wiseco valves
Bore & Stroke:.20 10:25:1 wiseco crank
Displacement:353
Carburetor:38mm round slide carb
Spark plug:NGK irdium
Stator:stock
Shifter:banshee modded for big bear oil cooler
Air Filter|Box:custom air box and tube made by me with a huge uni filter
Header|Silencer: DG full exhaust titanium header wrap
Clutch|Plates|Springs:tusk
Gearing F|R:12/41 Jt sprockets
Chain:EK quadra x ring
CDI|Killswitch:Me if i fall off
Cooling:perma cooler with big bear adapter
Other: skull shock covers ASC chain guide and slide case saver made by me and Im sure theres more.
 
Last edited:
Was not done overnight been working on for some time now. Just didn't do a build log takes to much time. I know aftermarket shocks are recommended but I love these 660 shocks awesome for my setup I can't see spending the money for works when happy with these. I took this thing from a ugly faded piece of junk to this. Maybe its not elite but I think its one badass warrior
 
The people don't get a vote the powers that be have declared it lol I just need better shocks and exhaust I guess
 
Still a bad ass quad dude! And yea they are covered! Can't be running around with pink shocks!
 
I thought it was strange that you put it up for vote when the mods are supposed to do that.
 
I'm so happy you didn't cut your fenders off, but why did you cut the mud flaps off? I really liked it before except for the bars, pipe, pegs, and heel guards. Im diggin the nice pegs, bars, heel guards, and grab bar. There are those dreaded creases in the third after picture. I almost bought widened arms when one of my stock arms got trashed but I like my quad skinny for the tight trails.

"Header|Silencer: DG full exhaust titanium header wrap"
Hows that wrap treatin ya? Can't see it in the pics
 
I still have mud flaps from other set I have it so I can change it up.

I thought you put it up they make a poll guess I was wrong
 
Last edited:
Just curious what is wrong with my exhaust it a DG excellorator was not cheap and improved performance and sound.
 
Back
Top