Warrior to Raptor 350 project

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
I like wiseco because they are forged like Trent said.. . I don't have any experience with namura. Never used one; but others that have, seem to really like them.
Yes i agree forged sounds better and long lasting for me... I was asking because WISECO have a well know reputation but I just discovered NAMURA.
 
If you wanna be elite, go through the elite build threads and see what they all have for mods.
 
Dont just build to be Elite build for what your going to need where you ride. Everyone of the Elites are different for every type of riding.
 
ALRIGHT! geeessfore thats a very good and true observation bro, i give you that one.

Thanks.


-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
I will try achive the most TORQUE possible, QUICK throttle response i can. I will try to hit +30HP and or THE HIGHESTcc:: PISTON DISPLACEMENT FORMULA i can.

-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
Standard bore 11-1 wiseco, cwr .415 cam and slight port

Do you have this in your machine? How do you describe the diff. in overall power ouput?
How many CC resolve your machine?


THANKS BRO.

-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
I can personally pick this thing apart. Go above and beyond elite, to me there is no such category to classify a status of a build. Build what suits you best and what YOU like not what others want. The vets have already summed this up for you don't just build to make Elite. Build what you want and the others will follow

Your next parts list: Hipers, Flexx bars, Fourwerx carbon hood or Quadtech Hood, Quadtech seat, Elkas, AXIS or Revalved yfz's from BNR motorsports, Wiseco 11:1, Stage 1 cam, Rath xc heel guards and nerfs or Housers, RPM dominator axle, Powdercoating, Carbon Fiber plastics lol, No all jokes aside first thing is to take those hub studs off the rear hubs then we can talk. Good job so far man, keep up the great work. I too use milkcrates as stands , not that we don't have 5 different atv stands I just like milk crates
 
@Beastmode17 THANKS BRO!
I really appreciate the motivation in all your comments through the whole project.

-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
MORE PICTURES (Velociraptor 450) by: JCDigital

More Pics::

IMG_3145_zps9lqckxml.jpg


IMG_3214_zpsmjhabeal.jpg


IMG_3213_zpsfyo3l8im.jpg


DSC_4451_zpsi5khg6u2.jpg


IMG_3143_zps0sdb0enl.jpg



-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
Nice to know Bro, appreciated. Thank you!

-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.


DGT::JCDigital
 
eeebec37bd5c5b2d01522789d69c926c.jpg
.

Ready to TRACK test! NO TIRES YET... Will have fun slipping/ missing corners...


Sent from my iPhone using Tapatalk
 
b5864dba2e1af1973834b9d2036c7feb.jpg

MODDING raptor original Hood plastic... making it flatter, more like a YFZ 450. Mainly I want to able to apply Graphic race number to it. I will update as soon as I finish


Sent from my iPhone using Tapatalk
 
1143008214a90681a3ffdc0dfd672069.jpg

Here is the sketch of my idea to add YFZ450 Radiator scoops to my project, ideas for mounts and Plastic/fenders shave. All this is already done.


Sent from my iPhone using Tapatalk
 
The aftermarket Maier yfz radiator scoops should be an easy fit I've done them on my build #5 so has Jeff and Weston it's actually pretty easy to mount them up I used the front gas tank bolt mounts to attach the tops
 
Back
Top