Recent content by warrior87fun

im looking to replace the worn out stock snifter with a direct fit to the trans. I have found a few on line but mines an 87 with the pull start on it. i have asked the sellers if it would fit with the pull start and one said no and one said yes. so im looking to see if anyone has used one with...

ok thanks i will pull the starter out this weekend and check it out

i have a 87 warrior that has a oil leak and it looks like it is leaking around the starter area on rides i don't notice any oil leaking but when its on the trailer there's always a puddle of oil under it is there a gasket or seal around the starter area that could be a problem it doesn't look...

I finally got my 87 warrior out and took it up and down the street for the first time today after buying the warrior for $250 not running i changed out all the electrical to a 98 including flywheel and we replaced the carb with a zoom zoom carb and re jetted it with 150 main and 45 pilot...

I need to replace my carb on a 87 warrior and noticed zoom zoom carbs are priced right but what about re jetting them are there jets available or can you use the mikuni jets my warrior has open air box k n air filer and a supertrap exoust

i picked up a nice 87 warrior with no spark. after trying for a while to fix it and finding more od things that didnt make sense i decided to remove everything and replace it with newer 98 warrior electrical. i used the key switch start stop headlight switch cdi and harness along with a 98...

87 warrior with 98 wirring runs update changed out harness cdi and flywheel and put some gas in it and fired up but now i need to pull apart the carb this was a easy swap

I decicided to remove the 87 electrical and install a complete 1998 electrcal inclubing a new flywheel warrior on the operating stand with its skin removed

he said its complete less motor but wasnt sure on exact year thought it is a 88 or 89 http://reno.craigslist.org/snw/4862545717.html

thanks beastywarrior228 i found one my neighbor had one

87 cdi on ebay my 87 bolts in but not sure about 88

i looking to see if anyone has a used flywheel puller for the Yamaha warrior before i go out and buy a new one thanks

87 to 98 hi thanks for the advice i just picked up a complete 98 warrior harness with all electrical and flywheel so now i got a project