Recent content by rex

I bought a yz250 MSR shifter. Works perfect...no problems.... I don't have an oil cooler...so I can't comment on the fitment with the cooler installed.

Ok...I checked everything again and I'm pretty sure that what's going wrong is that the chain is slapping...not keeping in contact. I've adjusted my chain and tried all the usual stuff. I noticed that there is quite a bit of slack in the front sprocket....is that normal? I popped off my...

Ok... I got my parts...thanks WarriorCliff77!!! Yesterday I put in my new cam and cam sprocket. Starts first tap of the button....but..... I took it for a small run and it's running good, idles great...but it's like it's skipping???? I readjusted the chain...still the same thing...

You got any engine parts? Like a top head cylinder?

Wanted to buy: Stock cam sprocket. ASAP!!!

Ok...the only thing I'm not sure of now is where the nut came from??? It's in the pic above. I was looking for the nuts under the valve covers but they're still intact. Are there any other possible things it could be??? Or is it the real reason for my breakdown??? Did the shop I...

Anyone have one of these? http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=130109634649&fromMakeTrack=true&ssPageName=VIP:watchlink:middle:us Ebay # 130109634649 Pics of it installed?

Ok.... I kept looking and this is what I found.... I removed the camshaft and all those metal bits and the nut were almost directly behind it. You'll also notice then end of the camshaft is completely mangled. And that's the good news.... With the camshaft out I can see in and...

I was wondering the same thing....I can't even find the T....but the F is clearly visible when I turn it. Anyone?

Went for a run a few nights ago. I got about a mile when it just shut off... Had to tow it back to the trailer and home. Checked the regular stuff...no go... Last year I busted my cam chain so I decided to check it again.... This is what I found. The small pin that's...

Somebody find me a set!!!!

Wanted to buy: Starter solenoid for a 2001 Yamaha Warrior. My local dealer wants $74.50!!!!

Ok...now I got it starting. I found this post on Bluetraxx... Like I said in my previous post, be sure to put the starter motor back together correctly! Your starter is turning backwards. I made the same mistake. I took it apart again and made sure the slot in the brush mounting plate...

Ok...I bought a new battery and still the same basic problem. I took off the starting motor and took it apart and cleaned it. When I put it back on...same thing....but now when I bypass the solenoid (across the two screws with a screwdriver) it's like the starter is turning but not doing...