I've got an '07 450 that won't e-start. I retrofitted a pull start on it prior to the problem and have verified the quad will start and run, but I can't seem to figure out the problem with the magic button. The problem surfaced after I washed it, the starter would just buzz loudly, without turning the starter. I replaced the starter with no luck. I replaced the relay with no luck, same buzzing. I've got power going to the starter but it won't turn. The starter won't turn even if I jump it directly from the battery. If I disconnect the power to the starter, the relay operates normally, just one big click as it opens when I hit the starter button. I cannot figure it out. Any ideas? Please help! Thanks...SC