Clutch not working

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Ridgerunner

Active Member
Joined
Feb 8, 2015
Messages
26
Reaction score
0
Location
West Virginia
I sit the rear end up on a block and threw it in gear and with the clutch pulled all the way in the wheels still spin what's causing this
 
try it with it on the ground but all you need to do is adjust the clutch cable either by the lever or where it goes into the case


Sent from my iPhone using Tapatalk
 
Ya I agree, do it on the ground,,if it still trys to move then on right side of motor is the clutch cable,,lossen the nut on rear side of braket= towards rear tires,,,all the way off and start tightening the nut on opposite side to apply more tension. If you have to run it all the way out then you may need new clutch pack.Adjust screw at clutch lever to were you have a 1/4" play,,it for slack so your cable dosnt bind during steering..
 
Last edited:

Latest posts

Back
Top