I bought a warrior that has no spark. In going through the tests in the manual, it says to check resistance between the Blue and Yellow wires for the pickup coil and between the Red and the white/green for the source coil. What I'm wondering is, the blue and yellow wires do not go into the same spot on the coil. The coil has 4 wires, blue and white on one end, yellow and green on the other. There are two pickups on the coil. The resistance between those pairs is within the spec given in the manual, but there is nothing between the Blue and Yellow. So is the coil bad or not???
Also, the CDI side of the plug only has 3 wires, which makes the white wire completely useless as it just ends at the plug. Is something wrong here??????? This is harder than I thought it would be.
Also, the CDI side of the plug only has 3 wires, which makes the white wire completely useless as it just ends at the plug. Is something wrong here??????? This is harder than I thought it would be.