87 a-arm ?

[1statv]

Both of my lower 2000 a-arms have this on the inner parts

But on my 87 lower arm they are missing both left and right . Should one be there for the 87 lower arms?? I'm thinking no because it blocks the grease nipple on the inside

 

[alex456123]

No the bottoms on an 87 should be bearings not bushings.

 

[1statv]

No the bottoms on an 87 should be bearings not bushings.

Bearings For lower arm?? Or just this

 

[bones]

they are in there dude... i sent them with everything .. bushings, tube, end caps, and bolts

 

[1statv]

they are in there dude... i sent them with everything .. bushings, tube, end caps, and bolts

I'm just making sure it wasn't missing anything because i compared it to the 2nd gen arms that's all but now I know thanks

 

[bones]

you have to use everything i sent you, the 2nd gen stuff is all different

p.s. feel free to throw those 2nd gen bushing in an envelope and mail them to me ..lol

 

[1statv]

That's on the right side correct

l

 

[bones]

nope the brake line goes down the back side

 

[1statv]

So I have to take the ball joint out and put it on the other way and that arm goes on the right (transmission side)????

 

[1statv]

With the ball joint flipped the other way ??

 

[bones]

other side.. thats the left upper

 

[1statv]

???

 

[bones]

yep

 

[1statv]

Thank bro

 

[bones]

grab a pic of the lower

 

[THORrider05]

With the ball joint flipped the other way ??

Looks legit from my house. Jk the bj is upside down

 

[1statv]

Looks legit from my house. Jk the bj is upside down

Lol that what I said with the BJ flip the other way

 

[1statv]

2nd gen shocks in 1gen a -arm =won't work

 

[THORrider05]

2nd gen shocks in 1gen a -arm =won't work

I have 2nd gen shocks on my 1st gen. The 2nd gen are a bit longer but i havent had an issue yet with bj and i ride hard and have a race on them with no issues.

 

[1statv]

I have 2nd gen shocks on my 1st gen. The 2nd gen are a bit longer but i havent had an issue yet with bj and i ride hard and have a race on them with no issues.

I just cut the metal piece that the bolt goes through and it got perfect