Search results

Does anyone here know if a 1995 warrior intake boot will fit an 87 warrior?

How du i use the front sprocket washer/lock. do i install the nut and bend the washer to the nut.so the nut dont turn.

So it turns out that a friend has an fmf exhaust is there any markings on them to tell me what bike it is for or are they universal.

So this is my issue.I just bought a new decent battery for the warrior.If the battery gets down just the tinnyest bit its not enough to start.and its rolling over farily fast.any suggestions?

Im thinkin of buying a 2008 raptor 350 stock exhaust off of my buddy for 100bucks.Now will this pipe fit my 87 warrior?And what do i need to put it on other than the header? Any advise would be helpful.thx

Could i use lock nuts for lug nuts?

I rebuilt my rear brake master cylinder and im ready to bleed them.how do i bleed me brakes?

Im going to paint my plastics and i was wondering if 180grit sandpaper would work fine.after i paint it im going to put some stickers on it then im gonna clear coat it.Any sugestions?

I just put a new timing chain and cam gear in my 87 warrior and now its making a high pitch noise from the top end around the cam gear. To remove my flywheel i use a puller and i tourqued everything that needed to be tourqued.my timing marks were all ligned up. do you think i over tighened the...

Problem tighting my magneto bolt How do i keep the crank from turning when i tighten the magneto bolt to 36 ft lbs?

Im tring to replace my cam gear and my timing chain.Im trying to remove my flywheel without a puller.What is the best way to get it off without a puller.Any ideas would be great.thx

Im looking to do the direct shifter mod and i can remember which shifter to buy.can someone help me plz i cant find the thread

I just bought a rear master cylinder rebuild kit for my warrior.Where can i find a video of how to install this kit?

What cam gear should i buy

Is this a timing chain and would it work fine for me.i have an 87 warrior. http://cgi.ebay.ca/Yamaha-Warrior-350-1987-2004-Cam-Chain-NEW-/400188773256?pt=Motors_ATV_Parts_Accessories&hash=item5d2d1c1388

So i found my oil leak.it was leaking from my cam cover.It shouldn't be leaking because i just replaced the o-ring on it not too long ago.could it have been the o-ring set i used.i used the Winderosa top end set.

The last time i used my warrior my rear brakes worked fine i went and rode it yesterday and my rear brakes go to the floor and the rear caliper isn't working.my brake fluid is full,I bleeded the line and still nothing.and if i use my parking brake it doesent work either.can anyone help me figure...

So i happened to notice oil on my head right above my exhaust port and its quiet an oil leak.what would it be laeking from.i checked the 3 covers there on good and i retourqued my head and nothing was loose.does anyone have any ideas?

Has anyone here custom made a back rack for there warrior.how did you fab it?

how does the exhaust header and the muffler stay together?is it some kinda clamp