Search results

does the pickup coil cause no spark because i took my stator out and the source coil is in specs and the pickup coil says .490 ohms when it should be way lower than that so i was just wondering if that was my problem of no spark i had replaced everything from cdi and on and this is the only...

So my warrior is hard to start it has good compression getting fuel and spark and ignition. So I don't think the stator is bad because Im getting good spark and the bike wouldn't run if the cdi box is bad. It has a new carb and jetted just yesterday rebuilt the starter motor, it has a new...

So I had finally found out my starting problem it was the starter motor filled with oil which is bad ,but does anyone know good places to buy a rebuild kit for the starter motor at a really good price without spending a lot of money? thanks it would be helpful

Well just waiting for parts it is the hardest thing to do is sit and wait to get it running anybody else had that feeling before is just wait for the packages?

so I did my rebuild I had warmed it up for 15 min and let it cool all the way down and now it seems to want to start really would like the help so I can break it in

So I am getting the warrior put back together and need to know the right way to break to engine in on a warrior the help would be really appreciated Thanks

Ok so i had installed my hot cams 1 and DID cam chain and it acts like it wants to start but doesn't so do i need to jet my bigger cam or adjust the valves? help would be appreciated thanks Caleb

to start my warrior i have it in neutral the light doesn't come on and i have to pull the clutch in and it starts and you release it and it sit and idles good but i just cant hit the start button i would have to pull the clutch in any help would be appreciated thanks

What is the torque specs for the cam I'm putting a new one in and the last one i had had the bolt back out and break the cam. Does hot cams 1 you can use the stock valve springs? help is appreciated thanks :atv:

When I give it some throttle the jug makes a scratching noise should I just do the too end. help would be appreciated thanks

I had a question what I should do for the top end I went out today and had blown the top end bottoms good just there is so many different pistons to choose from and kind of need it to be cheaper price running on a budget I do a lot of trail riding and what some thing a little bigger on piston...

I have a ticking noise from my warrior and its not the valves checked them so i don't know what it is when i rev it like some throttle maybe 1/4 the way and it starts ticking in neutral and forward gears but after first gear and you get going it stops and is running like it is supposed to just...

Hey guys I m new to the sight. I figured I would ask the best guys what size piston I need for a 366 bore? please help Thanks :atv:

Hey guys Im new to the sight. I figured i would ak the best guys what size piston I need for a 366 bore? please help Thanks :atv: