Search results

im looking to replace the worn out stock snifter with a direct fit to the trans. I have found a few on line but mines an 87 with the pull start on it. i have asked the sellers if it would fit with the pull start and one said no and one said yes. so im looking to see if anyone has used one with...

i have a 87 warrior that has a oil leak and it looks like it is leaking around the starter area on rides i don't notice any oil leaking but when its on the trailer there's always a puddle of oil under it is there a gasket or seal around the starter area that could be a problem it doesn't look...

I finally got my 87 warrior out and took it up and down the street for the first time today after buying the warrior for $250 not running i changed out all the electrical to a 98 including flywheel and we replaced the carb with a zoom zoom carb and re jetted it with 150 main and 45 pilot...

I need to replace my carb on a 87 warrior and noticed zoom zoom carbs are priced right but what about re jetting them are there jets available or can you use the mikuni jets my warrior has open air box k n air filer and a supertrap exoust

i picked up a nice 87 warrior with no spark. after trying for a while to fix it and finding more od things that didnt make sense i decided to remove everything and replace it with newer 98 warrior electrical. i used the key switch start stop headlight switch cdi and harness along with a 98...

I decicided to remove the 87 electrical and install a complete 1998 electrcal inclubing a new flywheel warrior on the operating stand with its skin removed

he said its complete less motor but wasnt sure on exact year thought it is a 88 or 89 http://reno.craigslist.org/snw/4862545717.html

i looking to see if anyone has a used flywheel puller for the Yamaha warrior before i go out and buy a new one thanks

i was wondering if any one has changed the harness from an 87 to a newer one i know the stator is different but is the flywheel the same and do you need to change the stator housing due to ony having one pickup and is there any thing else i might run in to while doing this this swap thanks

i was wondering if you can tell what year the motor is by engine numbers I have a 87 warrior that i bought not running and it looks like the motor has been changed motor numbers are 1uy-010399

I have a 87 yamaha warrior tenth digit in the vin is h I bought it not running so i don't know what was done to it in the past My question is my wiring harness At the stator has 4 wires (blue green yellow grey) the stator has 3 wires (blue green yellow) so it looks like the plug on my harness...

Hi can anyone tell me if a 87 warrior has a ground wire at the forward revers lever I picked up a 87 warrior that has no spark and after testing the pickup coil and source coil they appear good. But when i started checking wires i found someone had put a jumper wire on starting system cut off...

I just picked up a 87 yamaha warrior not running and was told it needed a new stator but after looking it over and checking a few things in not sure i checked the pickup coil resistance and ir reads 188 ohms also checked the source coil resistance and it reads 308 ohms but has no spark. my...