Will 22-12-9 tires fit my 10-9 rims?

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2000

Well-Known Member
Joined
Jun 18, 2014
Messages
602
Reaction score
0
I was looking at bear claws and they don't come in 10-9 only 12-9 so would that work?
 
They would probably hit your exhaust when you jumped and rob a lot of power


Sent from my iPhone using Tapatalk
 
In addition to possible clearance issues, the tread will not be flat across its width. It will be arced like a motor cycle tire.
 
I can tell you from experience that a 22x12x9 WILL hit your exhaust when you bottom out the suspension. I personally wouldn't go any bigger than a 22x10 on the rear purely for clearance purposes. When you smash a tire against a can it bends the **** outta the can mounts and in my case it ripped the can open at the mount. Now if you inflate the tire so it looks like a donut it will clear but if you run low pressure so the tread on that bear claw is flat you will have issues. My neighbor has 22x11x9 mud machines on his warrior and his barely hits the exhaust on landing. He bent his exhaust in for clearance and it still rubs.
 
Back
Top