Shaved fenders

[Ryan haness]

How does every one shave there fenders

 

[loui350]

There are multiple ways.
You can heat them up with a heat gun and slice through them with a razor.
Or use a jigsaw cut them. Then sand off the excess plastics strands and go over it with a blow torch lightly to make it look normal again.
It's pretty much whatever works man. Good luck

Sent from my GT-P3113 using Tapatalk

 

[duneracerweston]

i used a dremal and cut off wheel

 

[Warrior1996]

Make sure you either make a template or draw your lines out on the fenders first so that both sides are the same size and shape when you are done.

 

[loui350]

Make sure you either make a template or draw your lines out on the fenders first so that both sides are the same size and shape when you are done.

Good idea I thought using masking tape and eyeballing it was good but a template is much better

Sent from my GT-P3113 using Tapatalk

 

[Xxraptor350riderxX]

I couldn't get a damn razor and torch to work at all, so I used a dremal then sanded with 180 320 and 1000 it feels like a factory mold


Sent from my iPhone using Tapatalk

 

[loui350]

Cool man you should put up some pics for us to see

Sent from my GT-P3113 using Tapatalk

 

[savage24x]

I'm probably going to sketch it with a pencil and cut with dremel.

Sent from my ss_tenderloin using Tapatalk

 

['00 WO-YA!]

Sweet man, what style did you go with?

 

[jwrape]

I used a cutting wheel