O no blue smoke! Oil experts needed

[idle]

Anyone know if you can use marvel mystery oil in a warrior, my bike smokes blue on start up but goes away after it warms up and I think it will eventually need a piston and rings but moneys tight right now so im looking to just stop it from smokeing. Marvel has worked on my dads car before but I wanted to know if it will hurt the warrior thanks guys.

 

[dswwarrior350]

It wont hurt the engine but it will hurt the clutch.

If you do put it in your going to need a new cltuch kit soon.


Sounds to me like valve seals...... which are very cheap and easy to replace.

 

[jasonp]

I think piston and rings are shot.

 

[dswwarrior350]

Since its only on startup and stops once its warmed up id say valve seals but i could be wrong.

 

[idle]

yea well if i take it apart ill do hot cam stage one cheap, wiseco piston 1st ovrbore cheap, and valve seals. O and hopefully i just need bearings on the front and biushing and not a ball joint cause ill have to get a new a arm.

 

[idle]

o and before i found out how atv oil is different then car oil i used to run napa in my old quad and it shifted hard but never needed a clutch i rode it for 2 years. so maybe ill just get those seals. Any idea what the part number is for them?

 

[dswwarrior350]

If your doing a top end rebuild then the gasket sets on ebay have the seals in them already.