NO REAR BRAKES!

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

johndeere_g

Well-Known Member
Joined
Aug 11, 2008
Messages
46
Reaction score
0
Location
MT CROGHAN, S.C.
I HAVE REPLACED THE REAR CALIPER, THE HOSE FROM THE RESERVOIR TO THE MASTER CYLINDER AND REBUILT THE MASTER CYLINDER AND I STILL CAN'T GET THE REAR BRAKES TO BLEED AND WORK IS THERE A TRICK (AIR PRESSURE) CAN TRY OR AM I JUST AN IDIOT?
 
best way i have found is to suck the fluid thru the bleeder screw by using a large syringe with a piece of black rubber hose on it, have someone pour fluid into the system as you pull it out......it is hard to do the pump up and bleed on quads and such due the the small amount of fluid it moves. hope this helps.
 
Back
Top