new top end

[dazzo]

I went riding in Wisconsin (Black river falls area). i went through a quart of oil every 45 minutes of riding. 10 quarts in 2 days. my question is, can I just buy the complete weisco top end rebuild with the stock cylinder size and go back to a stock piston, because it has already been bored over to a 366. Thanks.

 

[Warrior1996]

You will need a new jug or you might be able to get your old one resleeved.

 

[dazzo]

alright, so if i went and purchased new this would be my option?

http://www.amazon.com/YAMAHA-WARRIO...sbs_263_2?ie=UTF8&refRID=1KHF7ABPZC15SEPNQH0K

 

[Warrior1996]

Yes that would do the entire top end (except for timing chain and timing chain sprocket). However, you could just rebuild your head and buy just a new jug or slightly used jug for much cheaper... also, those aren't OEM parts, so I don't know what type of quality it would be. For $500, I would run a high comp piston, cam, and other performance stuff.

 

[nukacola]

I had my top end done recently. That kit from amazon is available on ebay too, but does not come with a base gasket. Had to order separately.