need help

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

xj99

Member
Joined
Dec 4, 2009
Messages
8
Reaction score
0
Location
GA
is there a way to put balljoints in a 01 350 4x4
 
XJ - let me see If I understand, are you asking how to mount the ball joint into the A-arm? If so, I had to have mine pressed in at the local Yamaha shop. However, I have seen a guy with a home made press do it on u-tube so I'm guessing it's possible.
 
On the old style Wolvy's the balljoints were not replaceable. Ypu have to buy the whole arm. I took some 87' Warrior a-arms I had around here that were replaceable and graphed the arms together to make mine replaceable now.
 
you may have found one already but i saw a frame on ebay i cant remember the details, it should still be there
 
Back
Top