LED Lights

[pwgsx]

I was bored this weekend and decided to move my lights lower, add a LED light bar (crazy bright) and moved the neutral and reverse lights. Here are some pics.

http://www.ebay.com/itm/33094058765...NX:IT&_trksid=p3984.m1439.l2649#ht_1119wt_932

 

[jeffsyfm350x]

I was bored this weekend and decided to move my lights lower, add a LED light bar (crazy bright) and moved the neutral and reverse lights. Here are some pics.

http://www.ebay.com/itm/33094058765...NX:IT&_trksid=p3984.m1439.l2649#ht_1119wt_932

Just make sure your not pulling to many volts you will burn you stator out..

 

[pwgsx]

Its a 18W light, no idea but says it works on 12-30 volts. I only plan to run the leds alone so I think it should be ok, I hope!

 

[DeadLastRacing]

looks cleam. NOICe!

 

[1statv]

How much was that led light??


Sent from my iPhone using Tapatalk

 

[beastlywarrior228]

Just make sure your not pulling to many volts you will burn you stator out..

Its impossible to pull to many volts, voltage remains constant across the circuit which is 12v. However current is what you can draw too much of which is about 9 amps on a warrior or 110 watts total

 

[lbjamm]

Just make sure your not pulling to many volts you will burn you stator out..

I think you mean watts.

 

[THORrider05]

The warriors have really good stators and can handle up to 150 watts. I called ricky stator about a high power stator and they told me that the warriors have a real good stator. I swapped the stock lights out for 2 hella 500's that are 55watts each so im at 110 watts and still have another 40watts of cushion.

How did you wire the led up? Im looking into getting one for my front bumper.

 

[jeffsyfm350x]

I think you mean watts.

Yes thanks for the correction..:tup:

 

[jeffsyfm350x]

Its impossible to pull to many volts, voltage remains constant across the circuit which is 12v. However current is what you can draw too much of which is about 9 amps on a warrior or 110 watts total

Thanks for explaining I ment watts..

 

[pwgsx]

They were $34, I ran the ground to the frame with a switch and the + to the battery. I need to get a fuse still.

 

[lbjamm]

Looks awesome. Great idea!

 

[Gus]

Those LED bars pull a lot less amperage than stock or aftermarket incandescent lights, i wouldn't worry too much about it.

I've been looking at getting a pair of 11" Rigid knock-off LED bars, one for the stock location and another for the handlebars. They usually go for ~100 on ebay.