Jetting question

[89warrior]

Well I have decided to do some work on the warrior engine. This time around I have put in a 10.25:1 (1mm over) JE piston A hotcam and stock rappy 350 full exhaust with no arrester. I was wondering where I should start with the jetting? Right now I have a 150 main jet in, and stock pilot jet. Any ideas?

 

[98warrior]

well...how does it run with the jetting you have now? if its not running right in low-mid then up the pilot jet by 5 and see how it runs. if she's feeling sluggish at 3/4 to full throttle then up your main jet to maybe a 152 to start with and so on. do a spark plug test too.

 

[89warrior]

ok ty for the info.