High Temperature Paint

[TozeKituki]

Hey guys.

I would like to ask if you guys have ever used a high temperature spray paint.

I'll need to use it to paint the cylinder head of my bike so i started to investigate how I should apply it.

And one of the steps says that I should heat the surface in which we apply the paint at a temperature of 160ºC.

So can I use the oven of my house to do this or should I look for another way to do this?

PS: The heat gun can not be used because the temperature increase can not be focused or sudden.

BTW : The Paint is Motip high temperature resistant

 

[alex456123]

Just spray it on and run it. It will cure from the heat of the engine running. Just don't get near any water with it until it is cured.

 

[TozeKituki]

Just spray it on and run it. It will cure from the heat of the engine running. Just don't get near any water with it until it is cured.

Im going to paint it, when it´s off the bike

 

[CrazyDan]

You can paint the head and then put it in the oven until it is cured. Or put it back together and then ride it in dry condition. Either way works.