custom warrior

Advertise with us
shop deals on amazon
Shop deals on ebay
Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
W

warrior400r

Well-Known Member
Joined
May 29, 2010
Messages
71
Reaction score
0
Location
The Berkshires, Ma
Yamaha Warrior

MODS:
GYT-R front bumper powder coated black
GYT-R frame guards powder coated blue
GYT-R sprocket cover powder coated blue
GYT-R Air filter cone style
GYT-R Pre-Filter
GYT-R
Fasst Flexx bars 15degree woods bend/red absorbers/Blue bar bad
Powered coated throttle assembly (Black/Blue)/ greased and rebuilt
Powder coated front brake master cylinder (Black)
Motion Pro terminator throttle cable
Stream Line steel braided front/rear brake lines
Stream Line wave rotors front/rear
Stream Line heavy duty brake pads
Stream Line Billet steering stabilizer blue/black
Lone Star Racing +2 steering steam(chrome)w/anti-vibe 1 1/8th mounts powder coated black
Lone Star Racing E-brake block off powder coated blue
Lone Star Racing +3 +1 A-Arms Powder coated blue
Lone Star Racing +2 swing arm w/carrier powder coated blue
Lone Star Racing Billet aluminum hubs front/rear powder coated blue
Quad Works seat cover black GYR-R sticker on the rear
Ohlins YFZ450 front shocks pre-load, re-bound,Hard Soft setting, full coil over,
JB shock conversion kit warrior to YFZ shocks
OEM new rear shock
Tag Rear sprocket 40T
Tag front sprocket 14T
Hi-per Bead-locks rear rims 10inch black
G-Force front rims powder coated black
G-Force rear axle +2 +4
G-Force lock Nut
OEM rear brake hub powder coated black
OEM rear sprocket hub powder coated black
Stainless steel bolt kit
I.T.P. Hole-shot Gncc front tires 21-10
I.T.P. Hole-shot HD rear tires 20-10
FMF Power Core 4 muffler
FMF High flow header warped in drag tape
Edelbrock carb
UM aluminum air box
IMS kick up pegs
Hot Rods +7mm strocker kit
Hot Rods crank bearing
CP strocker piston +4mm 10:5:1
Titanium valves springs
Titanium valve retainers
Titanium valves
Piviot Works swing arm bearings
Piviot Works swing arm piviot bolt
Maier Front plastics (shaved) blue
Maier Front hood blue
Maier gas tank cover blue
Maier rear fenders blue
OEM light bulbs
Trimmed grill off front lights
Cut cage off around lights powder coated mount bracket black
Rear light delete
OEM wiring harness
Ever Start battery
NEW OEM gas tank
Billet Aluminum gas cap
Billet breather plug for gas cap
EBC DOT 4 brake fluid
Yamalube syn-oil 10-40
Always 91+octane gas
 
Last edited:
some more pictures of my custom built wheeler

Hi here are some more pictures of my ground up build of my Yamaha Warrior YFM350. And i call it a 2010 for the year because literally every bearing, plastic, and part is brand new. Every part is new except the frame, but even i powder coated the frame black and reinforced the frame and made sure every thing was perfectly straight.
 
Last edited:
holy ****! this thing is awesome!! i love all the black on the motor. sick lookin warrior man great job! elite.......
 
You have definite invented an enormous amount of time and coins in the rebuild... Amazing set up. Got to love those flexx bars...
when did you start this project.
 
that is by far one of the best looking quads i've ever seen!!!! and the black powder-coating is sick!!!!!!!!!!!where'd you get the swinger from and how much? just gave me some good ideas...............wait until (DEADLASTRACING)see's this machine,his is super sweet too.............WOW! nice build,need more pics....
 
he's got my vote for ELITE... deadlast should put up a poll!!!
 
I sent him the info to get an elite vote. If he ever gets back on and goes through the steps I can put a vote up.
 
Thanks everyone

thanks for the complements. Its almost over whelming.

I spent about a year and a half maybe two collecting all the parts. believe it or not i don't have the doe just to drop like that. I just took it piece by piece part by part. After i got everything i wanted i started putting it all together witch took about a month. Got everything powder coated i could.

I spent about six grand to build from the ground up. If you think about it a stock warrior cost around 5,500 new its a really good deal. I mean everything is either brand new OEM or after market so its brand new.

I got all the parts for a really good price. I just wanted to get everything for what i wanted to pay or at least as close as i can get. so it took a little longer to build then i wanted but well worth the wait.

If anyone needs parts i can help out!!!!

I will be sure to post all the pictures i have so you guys can get ideas on builds of your own.

The engine i did my self along with most of the work to save on doe. I would have never been able to afford to have it done at a shop. I used a heat flat black rattle-can paint from any local auto parts store. The first ride it will cure and look great and protect your engine and look good too.



If you guys have any more questions feel free to ask. I don't get on everyday buy i will try to stay on top of it more.
 
interested in becoming elite? think ur up for a vote? I sent you a PM with the details.
 
Also, I didn't read about what frame guards ur running in ur mod list?
 
You must log in or register to reply here.

Latest posts

Back
Top