B'swarrior
Member
- Joined
- Jun 20, 2018
- Messages
- 5
- Reaction score
- 0
I have a 2001 warrior that I have changed stator, coil, CDI, ignition switch. All things tested fine but I have multiple warriors and extra parts so switched parts out just to double check. No matter what I have done I get 1 single spark then nothing until I turn the key off and back on then again 1 single spark. I've taken off the tape and wire loom off the harness looking any areas that rubbed thru. I found a few spots that rubbed thru and repaired them. Went over ground wires also put new ends on them and dielectric greased every connection... Any suggestions would be greatly appreciated thanks
