Search results

I have been looking into doing the BigBear gear swap. I know that most guys are doing the 1st gear swap for more bottom end torque but what I am looking at doing is the 4th and 5th gear swap for more top end. I currently have a 446 stroker will all the goodies and it pulls my 25" tires like a...

Looking to buy a used warn unlocker for my 2003 Wolverine. If you have one please send me a pm. I can rebuild it or replace the cable if needed and the price is right. Thanks!

Anyone install a larger battery on there 350 wolverine, The battery box is way bigger than the battery so I am going to find a battery larger than stock that fits well in the stock location. Anyone done this and know what size you are running?

Please explain how this one is better than the factory tube with the NOSS filter adapter. Any pictures? Thanks

I have a supertrapp exhaust I removed from my wolverine I am saleing. Polishes up nice, only been on the bike for a year. http://denniskirk.com/jsp/product_catalog/Product.jsp?skuId=446178&store=Main&catId=109&productId=p446134&leafCatId=10901&mmyId=3660 Asking 200$ OBO

It seems that most of the Raptor 660 guys are upgrading their shocks which lets us buy there old ones for fairly cheap. The Factory Raptor 660 shocks are great on the front of the Wolvy. Exact same shock length but different valving and longer travel. Direct bolt up.

I have the primary clutch from my 2000 model wolverine with the EPI springs already installed for sale. I dont run oversized tires much anymore so I purchased a new clutch to avoid the hassle of replacing with the factory springs. The new clutch was around 130$ and the springs around 50$ so I...

Anyone have any luck with the Jet kits? I always have better luck just buying larger stock jets and moveing the needle. Customer service has been horrable everytime I call to ask for tuneing advice. I even set up an air fuel meter to help with tuneing and cant never get it where I want with...

How is everyone plumbing in there secondary oil coolers? Anyone using a valve to keep the oil from draining back out of the cooler? I think cutting the oil tube on the case would be the best place to tap in. What does everyone think?

Anyone out there have a good used 350 frame they want to part with?

I have heard of the fourstroke tech manual clutch kit for the 350 wolverines. Im interested to know how many people have experience with one of these?

After changing my differential oil in my Wolverine I noticed differential oil blowing out the upper end of the vent tubes that extend up by the air intake tube (just behind the gas tank under the seat.) I did a little research on the subject and I found that this blowby is fairly common on many...

What clutch mods have yall tried?, Im considering some HD springs.

Hello, I just ordered one of the new Warn RT25 winches and a CMP mounting plate. Im just wondering if anyone has any experiences with the new warn winches.