Recent content by jered651

Sometimes people do more damage than good to carbs. I would invest the money into a VM carb if you plan on keeping the wheeler ZoomZoom if you plan on selling it because you will never get your money out of the carb. another thing did you remember the Oring on the carb boot when you installed...

Did you try jumping the solenoid?

Did you test your new stator before you installed it?

Thanks

I have a 87 basket case I purchased it with just the 1 way bearing out on it I fixed that and cleaned the carb on it in the process of tuning the carb the head gasket blew pulled the head and jug when cracking the head bolts they were not tight at all so pulled jug off and looked in and...

thanks

Thanks I got it figured out with some more investigating warrior ran good and sold

stage 1 hot cam is low maintenance right?

Thanks I will look into the cam I have enough stock pistons that are good laying around.

Hello I just did my first stock rebuild on a 03 warrior and already sold it. Im going to take my next build up a notch. I have seen allot of old threads from 20011 and 12 on parts but wondering if there are new ones out there. I have all stock heads jugs and carbs. The one im starting on...

dialed in? What do you mean dialed in? Ive had issues with a moto 4 200 and now a warrior I rebuilt. works fine the first time now it doesn't

Sounds funny saying this but check your thumb kill switch? Also did you set your air fuel mixture to the bench setting of 2 turns out? Try pulling your plug to and turn over and see if you have spark. Pretty simple things to check and maybe you have already.

Thank you I wont waste money on this build than Once I get this one done with this one I will be a stroker or big bore with stage 1 cams

Anyone able to pm me a link to the online manual? I've seen old threads about this and was wondering If anyone has found it again Thanks

Im exploring my exaust options on a 03 I'm building anyone have opinions on the FMF power bomb header?