Search results

I sure could use one............ I think. We were in the mountains riding this past weekend and decided to jump out on the pavement to save a little time. My Wolverine 450 jumped up to 50 mph (going uphill) and them promptly fell on it's face and started missing like crazy. From them on I...

I think I'm hitting the rev limiter quite often by the way I lose power if I mash the throttle for more than a few seconds. I have to wonder if my belt has grease on it (again). So there's been no news on an aftermarket CDI box yet? Good luck Frosty

last year somehow I managed to slice the sidewall on one of my stock tires by just riding around where I hunt. There are some sharp rocks (I do my best to avoid them) on the trails in the mountains. I would like to buy some replacement tires with heavy duty sidewalls and more plies than the...

I still suffer with the same problem on my 06 Wolverine 450. I have tried everything like you as well with no fix. The funny thing is, I have the same problem on my TTR225 and can't get a handle on it either. I'm thinking it's go to be the rev limiter issue. It seemed to help when i...

I'd still love an aftermarket header pipe. While you're at it, I'll take a aftermarket CDI box too. Thanks Frosty

My 450 runs prety well. I have a GYT pipe, K&N filter, ect. I was in the mountains yesterday carrying a 250 lb passenger and when I would hold the throttle pinned form more than say 20 seconds (maybe 30) the ATV would start missing and lose power if I kept the throttle pinned. It's like...

I put front and rear racks on my o6 Wolverine 450 so i have the stock rear grab bar I no longer need. It was taken off while the ATV had under 30 miles and is in perfect shape if anyone needs one. $20 plus shipping. Send me a PM or e mail at [email protected]

I still have the pipe. I was hoping to post a picture of the pipe but I don't see that option. It's as new. The first $75 plus shipping takes the pipe. Frosty

What ever you guys figure out, count me in! I have a K&N filter and a GYT pipe now. I also have a power hits spark enhancer and a larger pilot jet and a dial a jet kit. I also pulled the head pipe off and ground down the restricting weld around the mounting flange. It seems the GYT pipe I...

I cut my sidewall in the mountains this past weekend while running 5 PSI in the tires. I had to use my electric pickup camper jack to break down the tire/rim to do a combo plug/patch to be able to use the ATV. I ran 25 lbs. of pressure in all tires from that point on to limit the amount of...

I put a GYTR pipe on my new Wolverine 450 and the stock pipe (which is like new with only 10 miles on it) is sitting in the GYTR box if anyone needs one. This is the whole pipe assembly with the heat shields, locking ring clamp for connection to the header pipe and the mounting harware. Please...

I did try the Wolverine with 4 660 rollers and then all 660 rollers. It seems a lot more sluggish with the heavier weights. The combination of 4 Wolverine and 4 660 Grizzly seems pretty good too. It didn't fix my problem though. I was still hitting the rev limiter (if that's what''s going...

I have some heavier rollers from the 660 Grizzly coming. I was going to get the 700 Grizzly rollers but they are twice as heavy as the 450 rollers, hence the 660 rollers. What I plan to try first is to use 4 of the stock rollers and four of the 660 rollers equally positioned in the primary...

You want the oil level to be at the top of the cross hatch pattern. Typically with Yamahas you check the oil level with the engine warmed up and the oil dip stick NOT screwed into the hole. The oil cap with the dip stick on it is merely set on top of the oil cap hole threads and the oil level is...

Thanks for the response. Yes, it sounds like the Yamaha 55 watt replacement bulbs will be my first attempt at enhanced lighting. The part number is ABA-70023-00-00 and they run from $25 to $30 each (depending on your dealer). I think these have a 35 watt (stock low beam) and the high beam...

Thanks for the repsonse, I'll check. I have called 15 places today to ask about a CDI box for the Wolverine 450. Dynatech was the only one that really showed any promise. Basically, it sounds like it's the squeaky wheel that gets the grease. We all need to bombard these guys with phone calls and...

I was thinking of swapping out my stock (I assume they are 60/55 watt)headlight bulbs and replacing them both with 100/55 watt bulbs would really help light up the night. I have to wonder if there is plenty of voltage output from the machine to support the change without problems? Has anyone...

Ok, now I'm miffed! I installed the Fixx Powersports Wolverine 450 clutch/carb kit offered on E bay. Yes, it does pull harder in the mid range but the engine seems to use a BUNCH more RPM in doing so. Now it pulls pretty good to about 43 mph and then I hear an engine miss and a backfire and I...

Thanks Cat, On all my other vehicles (except motorcycles) I run my tires at the maximum pressure stated on the sidewalls. In fact I typically add a couple pounds. For instance, on my wife's Honda Pilot the max pressure says 44 PSI. I run 47. On my Grand Cherokee the max is 65 and I run 68. On...

My 06 Wolverine 450 is my first ATV. I read in the owners manual that 6.5 lbs. of air pressure is the maximum for the tires with 4.5 to 6.5 recommended. Then this evening I read the tires and the sidewalls on the tires say 36 lbs. pressure maximum. Now, I can see if you were riding in a swamp...