Recent content by surftouch

well, thanks for all backing me up on that, got it all together and ran like dog poop, now ive got it all apart and thinking maybe blow through might be the way to go, the fuel just wasnt getting to the engine quick enough, it would start then die, i got it to make 3psi once, then it died, Im...

Well my friend do a little home work on suck through turbo kits that ive seen on plenty of turbo older cars, and tonight she fired right up, carb was on the intake of the turbo, and the bearing housing is a sealed unit so fuel cant get into the oil. lets think about this for a minute, if you...

Ok from the current pics this is not how its going to work, basically the carb is going to be on the intake wheel of the turbo, and the "cold side" of the turbo is going to go right to the head, whcich is going to make it like this, the carb is going in front of the turbo and the turbo is going...

Yeh im going to do an oil cooler also with a fan most likely to keep it well cooled. I just make some steel braided lines, I hate rubber hoses, still a little worried about sticks and rocks putting a hole or cut in the lines. more progress tonight, work is a little busy right now, race cars all...

top pics is a vid.

here are more pics and one vids, going together smooth,

More pics tonight , doing exhaust work tonight, looking good right now, shop is a boiling 88 degrees.

If you lower your compression it will take more boost to make the same power, as it would if I kept it stock compression if lower boost. The carb will go on the front of the turbo, making the turbo suck the fuel from the carb.

yeah ill run an lm1 wideband just for tuning, but ill take it off when riding in the woods, im gonna just jet the stock carb reall big on the main jet and see where it gets me. this is only going to be a max of 5psi setup. heavy duty clutch with heavy duty springs. Hopefully all goes well...

pics uploaded, not the greatest but ill get more tomorrow, hopefully get exhaust mounted and maybe charge pipes

Im installing a turbo on my warrior, Pics, VID!! Ok so Ive had a few warriors in my time, and im just a little board with them, so yesterday I got to thinking, Ive turbo charged 40 hondas, and a harley f150, Why not do it to the warrior. Im going to make it a suck through system, making the...

yeah anytime. Did you make sure and line up the crank balancer with the crank??.. Just something to not forget, otherwise the motor will come apart because of vibration

Deadlasts Rebuild 09.......DONE!!!!!! starting to look like a bike, man Ive rode a 450r that had those shocks and boy are they NICE!!

Lol turn you farking caps off man, DSWarrior, to be honest, with my clutch cover oil cooler mod, Mine wasnt that hot, and also after my break in, I ran just 93 and it ran just fine, I stoped mixing with 108 just to see. But maybe I got lucky, I had my piston chanphered to take away all the the...