Recent content by croc4

210 sounds reasonable, but why not leave it running all the time? Thats what I am doing, I have a fan with three speeds, currently I run it on high all the time, its only a 70cfm fan so its not a large air mover, but it seems to make a good difference, and the engine still warms up fine, maybe a...

fixed I fixed mine by replacing the needle and seat as well as a new float. The new float was most likely not needed, but decided to do it anyway since I was replacing the o-ring gasket and giving the carb a general cleaning / upgrade. croc4

thanks guys, off to the HW store croc4

Don't have the ATV handy, what is the socket size for changing the spark plug? croc4

got them from Osh, looks like they are M6x60mm, at least that is what seemed to fit, got the oil cooler running well, next step it to connect a fan to keep a constant air flow. this quad will be used more a util quad so its not always going to to driven fast. Croc4

Hey Guys, I decided to go the big bear route, I have everything except the bolts, can some one tell me the specs on these? I'm hoping to find them local at a HW store. thanks, Croc4

clutch cover gasket Hey guys, Back again with a question, I just found that I have a small leak on the glutch cover, it weeps oil ever so slightly around the lower rear. I have checked the bolts there were a could that were not as tight as I think they should be, but after tightening them...

fixed? hey Guys, New member, I have this same problem, I know this is an old thread, but were you able to find the cause and get it fixed? Thanks croc4