My Warrior makes a snapping noise when moving in first gear. About every half second or so when moving and appears to be from the transmission. Only does it in first gear and not in any other gear. Also whenever I shut the engine off it makes a loud single snap noise almost like the starter is...
Any tips on adjusting the mixture screw. It's on the bottom of the carb and I cant get anything to fit under there to turn it with. I was thinking about loosening the boot clamps and turning the carb so I can back out the mixture 1/2 turn and put it back upright and try it out. My only real...
I looked yesterday at my pegs and decided I needed 2nd gen pegs like you said and found a pair on ebay for $12.50 shipped and the cushion clamp is a great solution. Thanks for your help.:tup:
Will second generation heel guards/footwells fit on first generation Warriors? More interested if the part that bolts to the footpeg and frame will be the same.
Can anyone tell me how to delete my pull starter on my WARRIOR ? I will need a cover but whats inside that needs to be removed, replaced, or modified ? Thanks, Chuck:atv:
Don't know if there is anything inside the cover, haven't taken it off yet. I will pull it off in the next few days and let you know. If it's OK I may just swap you, if your cover will fit my 88.
My 88 Warrior has a pull start that is missing the rope and handle. Was that way when I bought it. Can I remove the pull starter cover and internal parts and replace the cover from a non pull start model ? I haven't taken it apart yet and any pointers would help a bunch. Thanks in advance.