Recent content by Bluejay

It will be a long drive,I'm at Washington State.

Update, Got the 12 grm rollers in this thing is the bomb gain 450 rpm quicker and more top end.Still good at lower elevation and alot better at high elev.

Update, Clutch setup Worked great I got 200 miles on it the only thing I'm changing is the roller to 12 grms. At home at 480ft elev. 14 are just right at over 4500 ft were I ride the most there a little heavy good low end but mid range it want to shift to soon.The top end I gain 5 mph it all in...

Here's some pic, I got the cheapes one non rebuildable & 7 settings so far it works good 1000 miles no problems.

I put one mine & my wifes, there 07 450 wolv. I used the Streamline stabilizer for a Raptor 660-700.looking at the front I mounted on right hand front frame&steering tube. The mounting was fairly easy. Hope this helps.

I hear all kinds of set up on the clutching, So I'm trying this first jack rearend up and check the rpm to wheel speed stock was 50 @ 7000 rpm same as my ground speed. And then I add UTV machine sheave and greaseless 14 grm roller kit W/ epi blu sec.spring.The speed was the same the rpm were...

I'm running the FMF exhaust & jet kit it fits up good and runs great.

Update 200 miles on the shocks every thing is working great, The ride is awesome. We ride alot of mountain road & trails rocks choppy stuff, washout ruts, off trail it so much more flexable on the uneven ground. It's wayyy better then stock I'm happy.

This is all experimental so far everything is working the way it should, I'll be racking some miles up this weekend. For the shocks I did some shopping around to keep the price down. The rear shock I'm using front shock off a Articcat snowmobile 17.0'' P/n 950-51-057-A, got it off ebay I had...

You guys & gals might like this, I'm trying something new I install all three fox air shock on my 07 450 wolv. I did a little testing so far they work great the big test is this coming weekend I'll keep you posted. bj