Warrior to Raptor 350 project

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
what about a flip top rear fender with pins at the lower mounts


Man Bones :eek: that sound GOOD! Im having some ideas right now about it, can you give some more ideas about??? Any link you can give to get some more clear ideas!

TKS Brother :tup:
 
::ALRIGHT Ready to SPIN!!! i just finish my CLEAR Stator Cover MOD.

Here some pics...
fc8849f726ae64f6567bc54847fb4bc9.jpg
7486ca5bb7a7fb644e98bfdefb80f3ee.jpg
17ae26ee1574d5b9dd2b9cd7445ae473.jpg



Sent from my iPhone using Tapatalk
 
That yamaha logo inside the cover came out cool man.

Yeah man, looks good and not too flashy, i really like it. Did you notice the middle of the sprocket? i have found a little Yamaha Circle logo sticker and try it on there... maybe im going to paint sprocket in GOLD like the chain and the center in BLACK so matches the Circled LOGO.

I cant wait to see it Spinning!!!!!!!!:slayer:


-WARRIOR 350- to -VELOCIRAPTOR 450::
Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.

http://www.yfm350.com/forums/newreply.php?do=postreply&t=32090

DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
when i was thinking of doing this... i was going to use a lt230 seat leach assembly and the top piece of rear frame from another warrior (fiy gees has a tweaked frame) here i pic of one on a trx250r



some links

http://www.atvriders.com/vbb/showthread.php?465627-flip-top-subframe

Man i need URGENTLY a Welding Machine!!! i now i have a clear idea... I have seen this in past but i never thought that i would be in the position to do it to my OLD WARRIOR.. now im Really PUMP to make it happen:slayer:
 
Alright! Today i spend my day MODDING my Warrior!!!
Here some pictures of RAW/Unpainted and Unfinished modification...

IMG_1055_zpsikfyog10.png


IMG_1052_zpsssomlbla.png


IMG_1053_zps2izupiki.png



-WARRIOR 350- to -VELOCIRAPTOR 450::
-------------------------------------------------------------------------

Tusk Handlebar Riser 30mm,ProTaper Handlebar Grips,Powermadd Star Handguards,Outlaw Billet Fuel Cap,Raptor 660 i-MX Rool Design IMS front bumper,Tusk Clutch Cable,Moose Racing EZ3 Shorty Clutch Lever Assembly, Tusk 36" Rear Brake Line,SUZUKI DRZ400 Direct Shifter,Raptor 660 Front Shocks,Raptor 660 Rear Shock,BANSHEE Rear Shock Linkage,Fullflight +3 A-Arms/2.6in Wheel Spacers,Motosport Products Nerfbars,+4 Swingarm/3in REAR Wheel Spacers,D.I.D Timing Chain,D.I.D X Gold-Ring Chain,NO AIR BOX MOD,Cold Air Filter INTAKE,UNI Air Filter,12 Tooth Front Sprocket,Hot Rods Bottom End Crankshaft Kit,YFZ 450 HeadLights,YFZ 450 Muffler,YFZ 450 Radiator Scoop Fenders,Raptor 350 Fenders, Raptor 350 Fuel Tank,Raptor 350 Seat & Seat Cover.

http://www.yfm350.com/forums/newreply.php?do=postreply&t=32090

DGT::JCDigital
Velociraptor450_yfm350_firm_zps7549211c.png
 
Awesome. I really like it.


Thanks,
man i think everyone can do this in about couple of hours, it results relatively easy and probably everyone have material at their house somewhere... it is rough and i didn't use the most good looking tubing but thats the idea, do want you want with what you have at hands!!!
 
I like it man but will it work with the grab bar installed and what about a latch. any thoughts there ?
 
Isn't it when you put the seat on the seat itself latches in back and front to lock it all down?
 
Alright! Ready for a BBQ and workout my Electrical system...
e75d21e7d3c39e69f25cdc36513efc4a.jpg


92f24446f76f5050ca2a86c5719f30ca.jpg
MODDING diff starter switch with signal lights, horn, press button killswitch and trigger starter switch.....

8390d67c1d4be974b0a77e126ca73b69.jpg


30120ae8b4864da543783ba11c172324.jpg


MOD-adding VOLTZMETER to my batterie case...
185bd5b4310e0b24ef8f0732db5fabc8.jpg
3e788a092249aa0af867513d4d9face3.jpg


MOD-sportbike CLEAR LED tail light w/signal lights for my Night Riding...
1a7fe0fe88e2242e303e537894bd9252.jpg



Sent from my iPhone using Tapatalk
 
Hey brotha question for you when you did the plastics mod did you have to make custom mounts for the plastics and seat?


Sent from my iPhone using Tapatalk
 
Hey brotha question for you when you did the plastics mod did you have to make custom mounts for the plastics and seat?


Sent from my iPhone using Tapatalk

For the REAR FENDER- only 2 screws will bolt on... then you will have to improvise a little for other fenders, but i can say everyone can make them fit relatively easy.
-RAPTOR 350 SEAT -->(IF YOU HAVE THE ORIGINAL WARRIOR BATTERY -long one- THEN YOU WILL HAVE TO MOD THE BOTTOM OF SEAT TO MAKE ROOM FOR IT =OR= EXTEND THE BATTERY CASE A BIT(maybe 3in down will do) =OR= USE RAPTOR 350 SHORTER BATTERY).
- GAS TANK --- I use some spacers (1 1/2) from frame to GAS TANK and make some improvise mounts for the FRONT of GAS TANK.
As soon as you get GAS TANK in place FRONT FENDER will seat correctly (the higher you sit the GAS TANK the higher FRONT FENDER will get AND the LOWER the HANDLEBAR will look! keep that in mind) i use handle bar raisers and make HANDLEBAR about 4in higher than stock.
 
Back
Top