Identify This Carb ?

[Pete7072]

I'm telling you your chances of getting another just like that one is almost0 you will be better off modifying the one you have to except a big peice of hose clamped to the carb and manifold

You're probably right.... My buddy owns a Motorcycle / Off road shop. He says bring it in, we'll measure every thing that could be measured and he'll have to look through his catalog, but he thinks we'll find one.

 

[duneracerweston]

Maybe but i dought it but good luck

 

[Pete7072]

Maybe but i dought it but good luck

I know it' sucking air right where the manifold meets the Head.

 

[duneracerweston]

Silicone it!

 

[Pete7072]

Correct me if I'm wrong here, There should be an O-ring in the Manifold where it meets the head ?

 

[MidwayUSA]

On the stock one yes there is. Should be a groove for the o-ring to sit in.

 

[duneracerweston]

Most aftermarket ones use a gasket

 

[headache]

Dennis Kirk has aftermarket manifolds that have the correct bolt pattern to bolt to the warrior head and fit the 35 to 38mm carbs. they are only like $17.99 i think

 

[Pete7072]

Just going to have to tear it down... again..... Just to measure. I looked on the Dennis Kirk Site and didn't find anything.