dyno jet kit

[1998yamahawarrior]

I just remembered i used the dynojet needle did you?

yep if it was in the kit i used it.

 

[buzzy613]

the accelerator pump mod is you take a click pens spring and put it in place of the shitty stock spring

on top of the slide ? that little spring

 

[buzzy613]

never mind i found were it was at. so just any pen spring?

 

[1998yamahawarrior]

its a rod that has a wide end on it in the bowl

 

[1998yamahawarrior]

if ya need a pic let me know because i still need to do it to mine. ive just been putting off taking the carb of til i have a good reason and that would be a good reason

 

[tyler]

Ya its worth it i did it and it made a little difference and every little bit helps!
And you can actually do it without taking the carb off... I have changed the main jet out before with the carb still on.

 

[1998yamahawarrior]

ya for some its probably possible but my hands are to damn big to do it and not have me loose something

 

[spdfrk1990]

I got some mikuni jets from rocky mountain they are only 3 bucks a piece. Prob better then buying any kit unless you found a good deal on a gytr kit I heard they come with mikunis. Im upping my pilot and main 1 size but I only have removed the spark arrestor.

 

[JonS]

I got some mikuni jets from rocky mountain they are only 3 bucks a piece. Prob better then buying any kit unless you found a good deal on a gytr kit I heard they come with mikunis. Im upping my pilot and main 1 size but I only have removed the spark arrestor.

what series did you get? i couldn't figure out which ones i needed. i know its the hex head type jet, but they didn't have 152.5 for it. what other jets could i subsitute for them?

 

[spdfrk1990]

what series did you get? i couldn't figure out which ones i needed. i know its the hex head type jet, but they didn't have 152.5 for it. what other jets could i subsitute for them?

I went on jetsrus.com and added some jets to my cart and that gave me the number then I looked it up on rocky mountain.
My raptor takes 102.221's the warrior is prob different tho.

 

[spdfrk1990]

These are for the warrior 100.604
http://www.rockymountainatvmc.com/p...le=Intake/Fuel&webCatId=16&prodFamilyId=25091
Thats odd rocky mnt goes strait from 150-155
I got a 145, 147.5, and 150 for my raptor I only plan on a exhaust and twin air filter tho.

 

[spdfrk1990]

Got my jets installed tonight havnt got a chance to run it yet but it idles good with only 2.25 turns out now and not 4+ lol.

 

[buzzy613]

can you feel the differance in the accel pump mod?

 

[oddywarrior]

usually the throttle feel is a little more crisp with the better accel spring, its a mod that should be done to every warrior carb imo.

 

[buzzy613]

ight ill do it tomarrow