Search results

did the spring mod and the valve cap mod. and accel pump rod seems to be moving freely. still doing . it guess its really not the big of a deal. just frustrating to spend days on the carb trying to figure out jetting and what not. and it not be 100%.. thank you .

Alright I turned the air mixture screw out to 2 turns went up to 147.5 runs great except for the mashing the throttle right off the get go Sent from my SPH-L710 using Tapatalk

thank you.... next dumb question. ordering jets online where to go?

i have a 96 warrior bored .40 over. intake boot is good. idles good (stock pilot jet) needle is stock setting main is 144 air fuel screw is 1.25 turns out ngk d8ea new plug. hmf pipe. timing is spot on valves are adjusted accordingly if i mash the throttle it wants to bogg down but if i...

toledo here

I guess ill try them Sent from my SPH-L710 using Tapatalk

Thank you Sent from my SPH-L710 using Tapatalk

Zzp means zoom zoom parts?

anyone have any experience with the zoom zoom carbs

where did you get a brand new carb at. i can only find those zoom zoom carbs

put a compression tester on ... and it didnt even move. yuck

still no start.. got a new coil and a new stator.another new plug and still nothing. it will turn over and over and eventaully back fire. once in a while and i hold my finger over the spark plughole and it blows my finger over.

ok ok. so i sprayed starting fluid right in the carb and go nothing. i guess my spark wasnt strong enough. so what to replace now. its a brand new plugg

hmm ill look into that next i have yet to spray ether in it just to test if it was getting fuel for sure or not. i did pull the pet cock out and chean all the crap off of that filter. . i just got a new inline filter before it stop running.

well i should be getting fuel its a fresh re build carb. i will get a can of starting flud tommorw and try it..

just pulled the plug out and hit the igniton button. and then i put it to someting metal and it sparked btwn them

the first one was black. after reading the jetting guide i think i got it to where it needs to be

almost like a milk chocolate color. i would sayy..

alright. ill check that tommorw. it did this about a week or so ago be fore i rebuild the carb. ... once i rebuilt the carb it fired right up when thru everything and it started up again. and ran for a while

petcock it on. took it out of the tank and cleaned all that as well. i have good compression i beleive .. not really sure thou unsure of how to check that prolly dumb but i dont know