Search results

Idles like a champ, bogs right off idle and stalls at full throtle

Yes I did do the pen spring mod. My lever doesn't seem to reach all the way down to give the pump rod a gooh push, only pushes it down about 1/4 way, not a very good stream from lack of presure.I can push it down manually and get a good stream. Is there an adjustment for that? Thanks for the...

Needle height was set at the 3rd groove from the needle end. I am running a 150 main jet and a 47 pilot due to the full exhaust system I installed and the vented airbox lid. The pump is squirting fuel just not sure if it's pumping enough. I cleaned everything with carb cleaner

just put in a carb kit on my 99 warrior, got it all put together and cranked it, idled fine but when i throttled it, it just spit and sputtered, backfired a bit. adjusted the air screw to 2-1/2 turns out and stopped the backfire but still spit and sputtered. Any clue where I went wrong. changed...

I am fixing to put in a new piston kit on my 99 warrior anybody have a good link for a step by step instructional on this. I have a feeling I am gonna need it. I'm going back with the factory 83 mm piston.

1999 warrior project Just purchased a 99 warrior to kinda tinker with. I've done some minor things already, stator replace, full pipe replace, rejet, changed up the bars and levers. I am fixing to do a top end rebuild on it. I need to put lights on it, the previous owner took them off and...