Search results

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Fuse keeps blowing

    UPDATE. So I spent the better part of 3 hours last night going over the wires again. unplugged everything and started over buy plugging in one thing at a time, well it cranked and ran. rode around for a little bit and everything was good. As soon as I his the headlight switch it blew the fuse...
  2. H

    seat foam

    I had that seat on mine, but its gray with yellow flames....comfy as hell, but the color scheme is a little off for me. ... i now have an all black.
  3. H

    Fuse keeps blowing

    I have checked the wires that run from underneath the hood to the back of the quad with a multimeter. The key switch was unplugged up front when I was doing this. And yes the quad is off not running. I put a fuse in and turn the key and it blows. How would I test the actual key switch? Also I...
  4. H

    Fuse keeps blowing

    Ok so I striped all the plastic and the gas tank tonight. I went over all of the wires; there are no rub marks or anything. Checked all of the grounds and everything is tight. So I took my multimeter and did a continuity test on the wires coming from the Key switch, and all of them tested good...
  5. H

    Fuse keeps blowing

    Thanks for the help. Looks like ill be spending tomorrow evening finishing removing my plastics and tracing wires. thnx for you guys help.
  6. H

    Fuse keeps blowing

    Ok so I was riding my warrior around the yard and everything was fine. I pulled up to my shed and turned it off. Went back 2 min later and it wouldn't crank. I mean nothing, not even the solenoid click. DEAD. So I jumped the solenoid with a screw driver and it fired right up. Well the 15Amp fuse...
  7. H

    Wheel bearing numbers??

    Ok so I’m getting ready to put breaks and bearings on my quad, is there anyone who knows the bearing numbers for the fronts? I sell bearing where I work, but I cannot find the numbers anywhere. I checked the manual that I downloaded, I also checked the internet. no luck. UPDATE ok i found the...
  8. H

    brake light

    Were does the switch tie in to the wiring harness to receive power for the light??
  9. H

    Help with wheel selection!

    Hey dead, are you wanting polished or black, also what backspacing and diameter? T-9 Pro Series Baja Front 10x5 4/156 4+1 Polished 1028017403 T-9 Pro Series Baja Front 10x5 4/156 3+2 Polished 1025379403 T-9 Pro Series Baja Rear 8x8.5 4/115 3+5.5 Polished 0825424403 T-9 Pro Series Baja...
  10. H

    Help with wheel selection!

    Just what i wanted to here. There is a ITP dealer here in my town that can get wheels really cheap...when i priced the ss112 sports, i could get'em (all 4 wheels) for $270, no shipping and he would mount my tires.
  11. H

    Help with wheel selection!

    Ok so i want everyones opinion on sum wheels for my warrior. Im trying to decide between these two kinds(see pic's below). First is ITP SS112 Sport. Either machined with black accents or chrome. (1st or 3rd). The Second is Douglas Ultimate SC CB. The Ultimate SC (Standard Center with Competition...
  12. H

    fuel tube/line help on carburator

    ok just went and took this, hope this helps. [/img]
  13. H

    99 Warrior problems

    OK i have ordered a carb rebuild kit, should be here this week. so i will rebuild the carb this weekend. thanks for all the help and ill let yall know how everything turns out. also ordered a parking break delete
  14. H

    99 Warrior problems

    yes i installed a whole new line with the filter. the new line and filter are the same lenght as the oraginal.
  15. H

    99 Warrior problems

    yea its an aftermarket atv in-line filter. and no it would not crank before i put the filter on there. i just put it on there cuz i thought i needed one...the gas now a days is full of crap.
  16. H

    99 Warrior problems

    ok update, i backed the screw out bout 3/4 turn and i get drip out the overflow...close togather but not steady.....also after i did this i was able to press the gas and it not die...rode it around about 2-4 mins and it did fine. then it run out of gas...only put in like 3, 4oz. ok i put some...
  17. H

    99 Warrior problems

    ok ill go try that now. thanx
  18. H

    99 Warrior problems

    Ok so I haven’t been able to ride since last weekend. Been rainin here off and on for a month. So I go out around lunch today and try to crank my warrior. It just turns over. So I check what I can see. I replaced the plug, and changed the gas. Now it’ll crank and run, but as soon as I tap the...
  19. H

    Hello to all

    Hello out there in Yamaha land. Ok so I just got my warrior on 4/17/09, and I love it. Not the newest out there, but not the oldest. It's a 99 yellow and gray/black. Pretty much stock from what I can tell. And I got a really good deal. Guy had two sprockets a 12 and a 15 that I got along with a...
Back
Top