I did this last time I had it apart, and no air passed through, I was surprised.
Also, just to clarify, when I lower the float height by bending the float tang up (with the carb upside down) does this decrease or increase the amount of fuel entering the carb? I'm pretty sure it decreases the...
Bought a Zoom Zoom carb to replace my messed up stock one, worked great for about a week. No fuel leakage and ran better then before. Now, a few weeks later my warrior is leaking gas out the overflow again, while riding and while
in storage. It is running super rich, sputters up to 1/4 throttle...
I went out and rode a little today and also played with the pilot adjustment screw, I figured out that the hesitation was more towards 1/8 throttle then 1/4 throttle. I leaned it up a little and it definitely cleared up the hesitation, running a lot better. I hope this really was the problem...
I have an 01 Warrior 350, stock motor with small bolt on mods. DG slip on, Zoom zoom carb, and a Pro Design Pro-Flow air filter kit. Today when I was riding, I noticed a slight hesitation off idle, to about 1/4 throttle. It spits and sputters a bit. I have a .150 main jet, and the needle is set...
Well, I feel dumb now. Totally forgot that my parking brake was messed up. Turned out the be the parking brake switch. Jetting seems great. Still going to do a plug chop though. Really appreciate the help, you saved me from having to tear into the carb again. :tup:
Well here's a little update for everyone, ended up rejetting with a 150 main. Opened up the carb to find that the jet needle had already been dropped. Previous owner must have done it when the air filter was installed. Also found out that it has been rejetted with what I think is a 147.5. Got...
Hello everyone,
New to the forums here. I have an 01 Warrior and I just installed a DG RCM2 slip on. I know there are better brands and products out there, but I was looking for cheap performance, so I chose the DG. Anyways, I just have a few questions about the jetting. The paper I got with my...