406elcamino
Well-Known Member
- Joined
- Jan 21, 2006
- Messages
- 144
- Reaction score
- 0
So today i decided to a big wash down of the machine because there is somebody interested in buying it. Well i removed all the plastics, skid plates, bumper etc... cleaned and waxed alot of the bike you dont see. Well when i went to hook up all the connections for the battery,cdi i went to start it after and all im getting is a *buzz* noise, i know i connected everything back the way it came off and i made sure the battery terminals are clean and connected, the cdi is hooked up, and there is a small wire that is like a butt connections which i connected and it still gives me a *buzz*. Well i checked the voltage on the battery as it sat and it was reading 12.5ish so i tried to start it to see what it measure and it was gradually getting worse eventually getting to a 11.6 on the multimeter so im hoping its just the battery that went a little low.
anyways anybody have any sort of ideas?
anyways anybody have any sort of ideas?