Recent content by rideblue52

exactly the same

I have the dg baja series full skids and i think they are the best i've seen so far the swingarm skid hasn't bet yet and alot of my other firneds with othe skids have and i've hit rocks hard and everything else b/c i have 20in rear tires but anything will be better than stock

i knew it wasn't the battery there was juice b/c it would fire sometimes but i found that the fuse holder had some mud in it cutting the circuit but thanks for the help

Today while riding I stalled it and went to start it again and all I hear is a fast clicking which is the sylanoide (sp?) in the back by the battery. My question is I thought it was the starter but after beating it it still did the same thing and from past experiance when its the starter it...

I dont know that thing looks pretty nice for what it is and how much it is.

I always cut mine off but take a screwdriver and pry up on the grip and spray some wd40 in there and work the grip lose

If the intakes anything like the warrior other than the fact that the carb is diff just take the airbox off by taking the 2 bolts out then take the boot off the carb with the screw then just unbolt your carb from the intake and disconect any cables/hoses and you should have it

I just got a stock replacement K&N b/c i wans't plaining on taking the lid off if your not going to i would just save the money and not get the pro flow kit

i got a stock replacement k&n and rejetted up to a 155 on the main and im still running a tad lean in the winter im thinking about going up one more but i would suggest the k&n

i have the hmf w/o the quite core and its not overly loud but i dont think i'd pass the 99db test for the state but no one around complanes and it dosn't hurt your ears and the power is amazing i've beat all other piped warriors i've raced so far so i guess that can show something and the price...

warrior was my first quad and i'd suggest it

looks like some elkas are needed very nice man

im 15 going on 16 this july nice to see some older guys on warriors

montgomery county PA about half hour north of Philly

any drill bit should go through the thin peice of aluminum to drill the bend i'd just start out with a small bit and go to the size you want try the inside of the bend it might help also maybe a razor blade could be used to punch it so you dont move the bit around