Recent content by Iasco

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. I

    Jetting driving me nuts!

    all good man, thanks :)
  2. I

    Jetting driving me nuts!

    yeah it's the air screw. As lean as it will go and its still rich.
  3. I

    Jetting driving me nuts!

    the 42.5 is what came stock with the bike, and it worked great until I cut the airbox lid off basically
  4. I

    Jetting driving me nuts!

    I cant find any pictures of what jets are 'supposed' to look like, anyone got any?
  5. I

    Jetting driving me nuts!

    So I have researched and tried pretty much everything I know 2001 warrior My idle is too rich with a 45 and too lean with a 42.5.. Im starting to think the 45 isnt the right jet. The 45 has holes down the side and the 42.5 just has 1 hole in the middle and the threads are different on the 45...
  6. I

    Getting ready for easter, Carb problems

    Ahh, well it is dark now, so I'll continue and post up in the morning.
  7. I

    Getting ready for easter, Carb problems

    ok, so i been reading. I never really realized there was an AIR screw and the THROTTLE/IDLE screw. I havnt touched the AIR screw... that could be where all my problems lie
  8. I

    Getting ready for easter, Carb problems

    OK, replaced those 2 o-rings, and replaced the spark plug. So I wont know if its running too lean or rich for a little while, BUT it will will only idle with screw ALL THE WAY IN but it sounds like the idle is too high. If i even lower it a little bit, it will eventually die
  9. I

    Getting ready for easter, Carb problems

    I think you mis read- its running a little too rich, but it wont idle unless that screw is all the way IN
  10. I

    Getting ready for easter, Carb problems

    It runs a bit rich, which is very confusing If it helps, I live in Utah about 4,500 elevation
  11. I

    Getting ready for easter, Carb problems

    45 pilot checking main ##EDIT## 145 main
  12. I

    Getting ready for easter, Carb problems

    I cleaned the carb and jets out & put new fuel in. But it wont idle unless the screw is all the way IN. But if I back it out even a little bit, it will idle for a minute, then die. HELP PLEASE :???: Also, The idle isnt as smooth as it was before I cut the lid off and re jetted it. This...
  13. I

    Cut hole in box, now wont idle

    I get all this, but going up 1 jet size made it really rich.. If I go down 1 size its too lean.
  14. I

    Cut hole in box, now wont idle

    I know what the jets do, what I dont get is why would it go from running just fine, not lean or rich when the air box lid was intact. Then I cut a part the air box lid, then it ran so lean it wouldn't idle without the choke on. Now that ive upped the pilot jet, it idles just fine, but now its...
  15. I

    Cut hole in box, now wont idle

    Like i said, im not sure exactly what main jet it is, but im at very high altitude ~9k Just wondering why it would go from running so lean it wont run without choke, to super super rich with 1 jet size
Back
Top