Will stage 4 elka baster front shocks fit

[drift king]

I can get a pair of stage 4 elkas off a blaster for $200 is it worth it or wont they fit?

 

[JonS]

if they are stock length they might work since 87-88 uses a tad bit shorter shock. otherwise they will probably lower you. really depends on what weight they are sprung for also.

sounds like a great deal though as long as they're not blown to smithereens.

 

[beastlywarrior228]

They might be slightly short but id be worried about them being sprung too soft

 

[duneracerweston]

GET THEM! The blaster OEM weight is only about40 lbs different. They should work fine! A get a measure on them eye to eye

 

[Mathius]

I did some homework on them a few months back, and yes they will fit your Warrior. Their the same length, but will be noticeably softer..

 

[Gen1Pat]

Also depends on what weight they are set up for. May be perfect. Anything over the stockers are an improvement.

 

[duneracerweston]

200 dollars and a possible revalve thats only like 400 max for a pair of 1600$ shocks! get them!

 

[beastlywarrior228]

Yep send them out for new seals and the correct spring rate and you could have some good shocks

 

[drift king]

They probs wont need to be revalved there fairly new, but i got a raptor 350 but that shouldnt make a diffrence got to be then stock probly get some +2 a amrs to go with it

 

[beastlywarrior228]

No the problem is them being sprung too soft for the quad

 

[drift king]

ohh ok what would happen if i didnt get them revalved

 

[beastlywarrior228]

If you dont get them resprung they will probably be way too soft