CarolusRex98
Well-Known Member
Ok i hear lots of people have problems putting on vent tubes (the little tube on top of the gas cap) so i made a method to putting them on, but i cant figure out the pictures, you will need:
-Lighter, be careful with fire, I'm not responsible if you get hurt
-Something that tapers out like a pencil, drill bit ect. (Preferably metal)
-Pliers (optional)
-Vice grip or clamp (optional)
-Step 1: Putt your tapered item in a clamp, grip, or between your knees
-Step 2: Slide the tube over the end as far as you can
-Step 3: Use your lighter to heat the end up
-Step 4: Slide it down farther
-Step 5: If not wide enough, repeat 1-4
-Step 6: Slide it on the cap-holder-thing (on the gas cap) as far as you can
-Step 7: Use pliers to slide it in even farther, as far as you can
-Step 8: Take of the cap and shake it to see if it stays on
-Step 9: Don't get gas thrown on you when riding
Now this is my method and i found it useful, so don't give me heck if you don't like it...
-Lighter, be careful with fire, I'm not responsible if you get hurt
-Something that tapers out like a pencil, drill bit ect. (Preferably metal)
-Pliers (optional)
-Vice grip or clamp (optional)
-Step 1: Putt your tapered item in a clamp, grip, or between your knees
-Step 2: Slide the tube over the end as far as you can
-Step 3: Use your lighter to heat the end up
-Step 4: Slide it down farther
-Step 5: If not wide enough, repeat 1-4
-Step 6: Slide it on the cap-holder-thing (on the gas cap) as far as you can
-Step 7: Use pliers to slide it in even farther, as far as you can
-Step 8: Take of the cap and shake it to see if it stays on
-Step 9: Don't get gas thrown on you when riding
Now this is my method and i found it useful, so don't give me heck if you don't like it...
Last edited: