• If you have bought, sold or gained information from our Classifieds, please donate to YFM350 and give back.

    You can become a Supporting Member or just click here to donate.

Part out

Yamaha Raptor 350 & Warrior Forum

Help Support Yamaha Raptor 350 & Warrior Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Deuce

Well-Known Member
Joined
Jul 15, 2009
Messages
273
Reaction score
0
Location
New Jersey
Hey Guys and Gals,

I have a warrior I was going to fix up and mess around with but I have decided that I'm going to wait until another warrior comes along thats a better candidate to mess with. So I'm going to part this bike out instead. I believe its an 01. Please feel free to contact me with whatever you may want or need. She's mainly stock though.

Thanks
Ken
 
I dont have pics because I'm doing this all through my smart phone (computer died), but if anyone is interested you can pm me your number and I can text you pics.

As for the tires and rims, the tires are pretty bald and the rims are nothing special
 
I dont have pics because I'm doing this all through my smart phone (computer died), but if anyone is interested you can pm me your number and I can text you pics.

As for the tires and rims, the tires are pretty bald and the rims are nothing special
Oh ok I was looking for a set with decent tires. Thanks
 
Wiring harness where the key switch plugs in. PO cut the plugs off and twisted the wires together.

Just looked it over, complete wiring harness looks real good and un cut / un damaged. How's $50 plus the ride sound?
 
How about $55 and you drive it? If so pm your paypal. I think post office has a $10 if it fits it ships box.
 
Last edited:
Bump...
wiring harness and rear brake caliper sold. Still have pretty much a complete bike worth of parts
 
Heel guards are MIA. Tank cover snd hood are blue (is a white fender / blue hood and tank) bike
 
Ok sorry for the delay,

Killswitch is in good shape and should work just fine

I have a jug and head from a parts motor. Jug was bored to the next size up but is in good shape, head had the cam go bad due to too tight of tolerances it appears and the bearing is bad. Other than that they should be good to go
 
I'm in need of a good working carb... Would u have one and how much shipped to 49343?
 
Back
Top