New brakes pulling without the pedal

[nukacola]

Got new drums put on the front and a disc on the back of my Moto 4.

The rear feels like if you're driving your car with the parking brake set a little bit.

It's not terrible, but I don't want to wear down the pads. Having trouble getting ahold of the mechanic that did the work for me, and a buddy of mine says to just ride it til it stops doing it (letting some of the pads just wear down).

Any easy way to adjust this or should I wait til the mechanic can do something about it.

They are EBC SV in the back and EBC drums in the front.

 

['00 WO-YA!]

Is the tear hydraulic on that or off a cable like the blaster?

 

[nukacola]

Cable.

 

[alex456123]

It's easy to adjust there should be a nut on the end of each cable just losen it a bit.

 

[nukacola]

I found my Clymer manual. There's a few more steps than just that. I think I can get it done tomorrow or something. Doesn't look too difficiult. Having true stopping power is nice for a change though!

 

['00 WO-YA!]

If it has the same setup as a Blaster you may end up taking it apart b/c they gum up inside and won't adjust right.

 

[nukacola]

Got it dialed in today. There's a notch that has to line up with a mark and it was a little off. Works nice now!