Neutral light trouble

[Big_Buttery]

Just got this warrior and I'm trying to get the electric start working. It runs perfectly fine without the key in it and I'm getting the key tomorrow. The neutral relay was not hooked up when I got it and I'm having some trouble getting it hooked up. I have two teal wires, one goes to the neutral switch and the other goes to the neutral light. do I connect them together and then put them into the relay? I also have two green wires with a white strip and they are connected together. Are they supposed to be like that? One comes out of the Cdi, they are joined together using electrical tape and then run up to the harness until it's grounded at the reverse lever. I am guessing it if for the reverse light.

 

[Warriorfreak]

How could it run if the keys not in it? Was it bypassed or something?


Sent from my iPhone using Tapatalk

 

[Big_Buttery]

I'm not sure. I picked up a used wiring harness yesterday and I was going to use it but it's from an 02-04 so the Cdi is different. I wired up the neutral switch using the other harness as a guide. I'm gonna order a new ignition switch off eBay tonight and go from there.


Sent from my iPhone using Tapatalk